Posts: 2,026
Threads: 367
Joined: Jun 2010
City: Dover, OH
Well, I have finally gone and done it! I bought one of those big, solid state, stereo consoles I always tried to avoid! From what I can tell, this is a 1969 model. Everything works except the phonograph, which sorta works. Only thing I haven't tested is the hookups on the back for the aux/tape connectors and external speakers. Oddly, it doesn't do anything with the speaker select knob on 'both'. Maybe it needs the external speakers to complete the circuit for that? Definitely sounds good.
No matter where you go, there you are.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Neat! 
If it says "RCA Victor" and has the Nipper logo, it is pre-1968. RCA changed to that ugly new logo in 1968 and dropped the "Victor" from its electronics products, as well as the "His Master's Voice" logo.
I remember as a kid, back in 1968, when I had the chance to look at console stereos, I would do so...and at the age of 8, I could tell older stock from brand new models - the older stock still said "RCA Victor" inside. The new models had that ugly RCA logo, no "Victor." By then I was rather fascinated with the "His Master's Voice" logo. Funny thing, as I grew up, I lost interest in His Master's Voice, Nipper and RCA Victor...maybe because, in my view, RCA dropped everything about their products that was "cool" to me (remember, I was only eight years old when the change was made by RCA).
--
Ron Ramirez
Ferdinand IN
Posts: 2,026
Threads: 367
Joined: Jun 2010
City: Dover, OH
Hmm, I wonder what year this unit is then? It does say RCA-Victor right on the dial bezel and still has the little Nipper Logo over the RCA logo on the bezel and (worthless) 45 spindle. Yeah, gotta do something about that part.
No matter where you go, there you are.
Posts: 4,705
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
If you can't find a reference for the model there should be a EIA date code on some of the parts inside, such as the filter can cap.
Regards
Arran
Posts: 2,026
Threads: 367
Joined: Jun 2010
City: Dover, OH
So far all the references I can find on this model, including old newspaper ads, date this as a 1968-1969 model. I'd post one of the ads here, but all the sites demand you have premium memberships to actually see and copy the full size pages. Harrrumph! 
No matter where you go, there you are.
Posts: 1,108
Threads: 89
Joined: Jun 2011
City: Tacoma
State, Province, Country: Washington
It's in Sam's 981-6. If you have access to that you can get an idea on the manufacturing date.
Posts: 2,026
Threads: 367
Joined: Jun 2010
City: Dover, OH
Thanks, Brenda. I'll have to see how far up my friend's manuals go. I am supposed to be visiting him over the weekend.
No matter where you go, there you are.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Could be also, that RCA produced some 1968 models with the old logo (maybe leftover 1967 tooling?) before switching over 100% to that "new" logo and dropping "Victor" from the brand name?
--
Ron Ramirez
Ferdinand IN
Users browsing this thread: 2 Guest(s)
|
|
Recent Posts
|
|
Philco 46-420 Code 121 Reception issues
|
| Welcome Eric,
I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM |
|
Philco 46-420 Code 121 Reception issues
|
| You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM |
|
Philco 42-1008 conversion kit
|
| Interesting. I haven't seen that before.klondike98 — 07:02 PM |
|
12' Philco
|
| Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM |
|
Shadow Meter Bulb
|
| Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM |
|
Shadow Meter Bulb
|
| Ok. Thanks for the correction.RossH — 03:09 PM |
|
Model 28L
|
| For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM |
|
37-60 revision 6
|
| I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM |
|
Shadow Meter Bulb
|
| Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM |
|
Hickok AC51 tube tester
|
| Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM |
|
Who's Online
|
There are currently 5876 online users. [Complete List]
» 4 Member(s) | 5872 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
