Posts: 2
Threads: 1
Joined: Jun 2014
City: Indiana
Gentlemen,
I am new to this forum and been with my radio hobby about 2 years and enjoying it more everyday.
I just began working on a Philco 116-121.
I could use a schematic and a parts list??
Is there a code I could follow on the paper capacitors??
They just list a part number with no values, i.e. 30-4024, 30-1034???
Thanks for any help!!
Matt
mtroy1369
Posts: 16,481
Threads: 573
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Are paper caps tubular? Those usually do have values and voltages on them. Some could be found here.
http://philcorepairbench.com/papercap.htm
1000 VOLTS WORKING VOLTAGE
Capacity Mfd. Part No.
.006 30-4024
Posts: 2,128
Threads: 18
Joined: Oct 2008
City: Merrick, Long Island, NY
Posts: 89
Threads: 25
Joined: Apr 2013
City: Cleveland, OH
Justradios.com has capacitor kits as well instead of buying them individually
AJ
Go mountaineers!
Posts: 2
Threads: 1
Joined: Jun 2014
City: Indiana
Thanks a million gentlemen!!!!!!!!!!!!!!!!!!!!!!!!!
I appreciate the Philco code page for the fixed paper capacitors.
All they had on them was a Philco part number, this really helped with the values.
The schematic and parts list is quite helpful also.
Thanks again,
Matt
mtroy1369
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Welcome to this site, Matt. The 116 tombstone is one of the best table sets out there.
Strongly advise:
1. Take a good look at the different areas on this site. MANY questions can be answered here!!
2. Re-stuff the "bakelite block" capacitors under the chassis. The blocks also serve as "tie-down points" for the wiring.
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
