Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Help with Identification.
#1

Does anyone recognize this radio? The only identification is the name Royal on the escutheon. When new it would have had all globe tubes. The line up is left to right 280, Pentode, 224,224,224,224. The sockets are stamped with that information. A number 47 is in the pentode socket.
I also posted this on the other site which has had 178 views so far but no luck identifying the manufacturer.
Thanks,
Henry


Attached Files Image(s)
       
#2

Well royal is a company that was run by DeForest who was owned by Crosley. I dont see it online but many radios were not documented. Halson radios are notorious for that as are smaller name brand branch off's.

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#3

I saw this one on K-town show.
I remember commenting that it looked a whole lot like the Philco 20 (latticework is different but the shape and the spiral grove ornament are similar).

Is it a Gloritone by chance?
Or it could be a Zenette.

http://www.radioatticarchives.com/radio.htm?radio=6153
http://www.tuberadioland.com/zenithL_main.html
#4

Kirk and Mike,
I am really stumped with this one. Kirk,
Deforest was suggested tome earlier but I can find nothing really.
Mike, The Gloritone at least looked more similar with the tube shield in the back.
I too was struck by how much it reminded me of a Philco 20 and it is almost as large. I don't recall another radio with that tubes and shield only look from the back. Also I have never seen a tube socket stamper pentode, always if stamped the tube number is stamped.
My old IRC catalogs list a Royal 9v but the tube line up is different when I looked it up in Rider's.
I am really hoping someone here will know this radio.
Thanks for the response.
Henry
#5

I regret now I did not remember the brand, it had exact same front as yours.
As for repairs, this is likely a TRF and a common sense recap/recarb will probably do it, and alignment should be simple as if it is a TRF there is no heterodyne alignment song and dance. Even with no sch this should be no too bad.
#6

Sort of reminds me of an early west coast set; there were a lot of small garage operations going on out there during this time frame. Maybe looking through the Floyd Paul books will give you a clue:

http://www.antiqueradios.org/paul-bks.html

Otherwise, like morzh said, as a TRF repairs should be fairly straightforward.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#7

Eliot Ness,
Thanks for the tip . Maybe someone who has those books will take a look for me.
Henry




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
New Philco Repair Bench
I am sure this is the archive, and not the Chuck's site.morzh — 09:50 PM
Made mistake & did not label connection
It's not like we are good friends with that wire and can tell it from other ptetty identical looking wires. Why'n't you...morzh — 09:49 PM
Made mistake & did not label connection
I'm not sure why that wire wasn't covered in the video. I'm pretty sure the 6A8 won't work until that pin is grounded. Y...RodB — 09:47 PM
Made mistake & did not label connection
You'll have to forgive me, I am not sure what you mean.  Can you explain what you are really saying.  If anyone does not...georgetownjohn — 08:05 PM
Made mistake & did not label connection
Those are details better left to the ones who know. Maybe you disconnected the wrong end of the wire.RodB — 06:22 PM
Made mistake & did not label connection
Maybe this is starting to make some sense in my hard head.  Is this why the wire in question was not in the great Ron Ra...georgetownjohn — 04:34 PM
Made mistake & did not label connection
I was correct with the 6A8 pin connection's, 7 and 8 are connected to ground as well as the tube shield (the broken line...RodB — 02:41 PM
Made mistake & did not label connection
What does the dotted line representing that surrounds the tube in the schematic?georgetownjohn — 02:17 PM
Made mistake & did not label connection
Hello John, I have been there either label got lost or was not labeled ! Sincerely Richardradiorich — 02:15 PM
Made mistake & did not label connection
Sorry, it is a Philco 37-640.  Does that help?--Johngeorgetownjohn — 02:14 PM

[-]
Who's Online
There are currently no members online.

>