Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Milk House Philco
#1

Dad and I decided to visit a family we know to check out some antique tractor parts he had been offered. While there on the old farm, we mentioned our trip up to Mentor, Ohio yesterday to pick up an old radio and remembered one he had stored away in the old milkhouse a couple years back that his wife's relatives had never come around to claim. Apparently it had spent most of it's life in the attic of an old house in town and he said it was pretty filthy and the push-buttons were all broke. He asked if I wanted to see it and I said yes, of course, and what I discovered was a Philco 39-40 console that was indeed filthy, but a definite diamond in the rough. After talking it over with his wife, I nabbed the radio for $60 and even found the mostly intact owner's manual laying inside. After an initial cleaning (sooty with a helping of muddy cat paw prints) it is looking pretty good! Buttons are toast though, as is the cord which fell off.

   
   
   
   

No matter where you go, there you are.
#2

Nice find! Nice price!
#3

It's in good shape.
#4

Great find.. And the cabinet and grill cloth look nice.
#5

Icon_thumbupIcon_thumbupIcon_clapIcon_wave
#6

Thanks! I have never really pursued these style Philcos before, but this one was just in too good of shape and the price was right. Now, I will need new pushbuttons for sure and I think this model used the transluscent 'wine' color buttons. Kinda hard to tell as my buttons have degraded down to flakes, literally! Also, what would be the best way to get the green tarnish off the bezel? I have some Brasso, but I don't want to go too far and lose all the patina.

No matter where you go, there you are.
#7

Very nice find, Jayce! I might have a set of the repro wine buttons around here, actually.
#8

Amazing...you never know.
#9

Depending on the year the dial escutcheons on those sets could be bright brass, painted a gold colour, or have a faux wood grain.
Regards
Arran
#10

For 1939-1942 Philco escutcheons with thumbwheel controls:

I think the 1939 model escutcheons are brass. The 1940 escutcheons are brass plated (or painted) steel. The 1941 and 1942 escutcheons have the faux woodgrain.

--
Ron Ramirez
Ferdinand IN
#11

Unless they used up stock from the previous year, the escutcheon they used on my 40-780 was brass, I do not know if it used to have paint on it or no. Bob Andersen's 39-30 was brass but was painted with metallic gold or brass paint rather then bright brass. Neither of these sets used the thumb-wheel knobs however, so the thumb-wheel knob sets like the 39-116 may have been different.
Regards
Arran
#12

I decided to do the magnet test and the little magnet I used will not stick to the escutcheon on the 39-40. So, it is probably brass. As far as any paint goes, that is had to tell, but I have so much crusty green tarnish sticking up that I will have to do cleaning no matter what. Now, the escutcheon on my 40-180 looks like brass, but the magnet sticks right to it.

No matter where you go, there you are.
#13

Check the top corners of the openings where the buttons came through... If there was paint there, that's the most likely place to find any remains.

Pretty set! and the GRILL CLOTH all intact... Unusual.




Users browsing this thread:
[-]
Recent Posts
1949 Motorola 5A9M
This would be the second portable in the "other radios" forum where I have a similar one in my collection. I h...Arran — 12:41 AM
Looking for any info: 1977 Ford-Philco Console Hi-Fi Turntable and Radio
Hi PittsburgTost. The record changer looks like a Garrard or BSR (Likely Garrard). The spindles just pull out and pu...MrFixr55 — 11:57 PM
Looking for any info: 1977 Ford-Philco Console Hi-Fi Turntable and Radio
Hello PittsburghToast , Welcome aboard and it looks like gary may have something for you ! now if I dig through my se...radiorich — 11:35 PM
Model 80 Antenna Issue?
You are kind of on the right path. You can touch the grid cap of the Detector/Oscillator 36 tube. I'm expecting a respon...RodB — 08:48 PM
Looking for any info: 1977 Ford-Philco Console Hi-Fi Turntable and Radio
Welcome to the Phorum, PittsburghToast!  I found an old thread that my interest you regarding the quality and worth of P...GarySP — 08:48 PM
Looking for any info: 1977 Ford-Philco Console Hi-Fi Turntable and Radio
Welcome to the Phorum! :wave: We do not have anything on that unit in our digital library. There is a Sam's Photof...klondike98 — 08:47 PM
Model 80 Antenna Issue?
I’ve replaced all the caps and resistors and the radio is working but minimal volume unless I put my hand near the re...Hamilton — 08:24 PM
Looking for any info: 1977 Ford-Philco Console Hi-Fi Turntable and Radio
Hi there! this is my first time posting. I recently picked up this Ford-Philco Console record player and radio at a yard...PittsburghToast — 07:28 PM
philco predicta
I found that where I have the 140v B+ there is 50v and the tuner receives 235v through the orange cablecgl18 — 04:14 PM
Philco 91 code 221
Chassis grounds thru rivets is another good place to look. Oh and the stator screws on the tuning cap where the leads at...Radioroslyn — 08:11 AM

[-]
Who's Online
There are currently no members online.

>