Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

new safety caps from Justradios
#16

Yes pretty much it, it is a some sort of breakown voltage.

BTW Mouser carries Lelon and Xicon, the latter has been aound forever.
But they are mostly GP ones.
#17

Did I say Xicon, I was thinking of Xunda brand caps, Xicon makes cheap parts, and it shows in the gauge of wire leads they use, but I don't think that they are inherently bad or fraudulently rated. Xunda caps are garbage, they are the reason the Toshiba DVD player will not power up anymore. Lelon is a notorious crap capacitor brand, a Taiwan brand yet, I have a computer tower with several swollen Lelon caps on the motherboard, why Mouser pedals their trash I do not know. Su'scon is one I have seen fail in LCD monitors quite frequently. Then you have ones with a name that is sort of like a good name brand, but misspelled like Robycon
If you want to know which electrolytics to stay away from, try www.badcaps.net , whenever I find a mystery brand I run a search on that site. You can also try mystery brands of polyester film caps, I did with the TC brand ones some places sell, it seems there is nothing noteworthy about them, at least in a negative way.
Regards
Arran
#18

Just checked my last order of caps from Mouser from about 2 months ago they were all high ripple. Blind pigs finds a acorn. Thanks again David
#19

Thanks for the link to the ceramic safety caps. I keep screwing up and getting the plastic box type with very short leads Icon_sad

They don't seem to carry much in the way of 500v caps at Mouser but Digikey has a nice selection. 10uF @ 500v, 10000 Hrs @ 105°C Nichicon are $1.83: http://www.digikey.com/product-detail/en...ND/3664442 Only $1.44 qty 10+.

That being said, JustRadios has great prices on mica caps and some hard to find stuff like 1W and 2W resistors in the megaOhm range and higher voltage (1000V+) caps.
#20

Thanks for the link, Bob... I need to get to digikey more often. they were the only place that carried the caps I needed for the PS in a battery set who didn't want 35 bucks a piece for them.

I've also ordered some of the ceramic caps from mouser.. along with the caps that were backordered (Space restrictions limits my flexibility)




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 46-480 Electronic Restoration
At long last, it is aligned! I’ve uploaded a couple of new videos to YouTube to demonstrate. YouTube picked up on Hall a...jrblasde — 10:08 PM
Studebaker/Philco AC-2687 car radio
Hello Phil, Welcome aboard what is the model number of that radio ? Sincerely Richardradiorich — 10:06 PM
Studebaker/Philco AC-2687 car radio
Just speculating of course, but you could probably find another transformer from another car radio of the same era, pref...Arran — 09:00 PM
Studebaker/Philco AC-2687 car radio
Hello I am new here and I could use some advice. I am working on my 1955 Stude/Philco car radio and have determined tha...Pdouglaski — 06:43 PM
Philco 42-345 Restoration/Repair
Thank you MrFix55 and GarySP with helping with the Antenna, for now I am placing the Antenna on the back burner and work...osanders0311 — 02:24 PM
The list of my radio & TV collection!
Yes, Michael. But strangely enough, I managed to keep the original veneer. I must admit that I don't really like it, so ...RadioSvit — 02:21 PM
The list of my radio & TV collection!
Good radio. I bet there was a lot of veneer fixing.morzh — 02:16 PM
Philco 46-480 Electronic Restoration
>> it is because I am retired and a little demented. You have just the right amount of it. No perfectly sane p...morzh — 02:14 PM
The list of my radio & TV collection!
Old Zenith 5S-29 tube radio. First turn-on after repair and reception quality testing. Demonstration of the operation of...RadioSvit — 01:27 PM
Philco 42-345 Restoration/Repair
Welcome to the Phorum, osanders0311!  Regardless how far you intend to restore this set, first priority should be replac...GarySP — 11:51 AM

[-]
Who's Online
There are currently no members online.

>