Bought Stromberg Carlson AWP8
Posts: 15,704
Threads: 551
Joined: Oct 2011
City: Jackson, NJ
Will post pics when get it.
It is SC transoceanic similar to others, in 50s RCA, Hallicrafters and SC made their versions.
I was waiting for this one awhile - there are rare and those really clean are even rarer.
Like this one
http://radioattic.com/item.htm?radio=0260515
Posts: 41
Threads: 4
Joined: Jun 2011
City: Fort Myers, FL
Mike
That's been on my bucket list for sometime. It really is hard to find a real nice one. However i just bought a Pretty Nice RCA Strato World 3bx-672 in the rare alligator case. Waiting to see the pictures of the one you bought!!
Sincerely
Keith Jansen
Posts: 668
Threads: 144
Joined: Jun 2011
City: Elko,MN.
How does it compare to the zenith's
Have had a couple of those.
Looks like the SC has a more durable material on the cabinet.
Neat radio.
murf
Posts: 15,704
Threads: 551
Joined: Oct 2011
City: Jackson, NJ
Keith
Yp, I have been looking for RCA strato myself, though I thought of a 7bx.
Murf.
I am sure the later Zs and their ounterparts were comparable. The SC looks too sophisticated to be much worse
Posts: 3,138
Threads: 56
Joined: Apr 2011
City: Lexington, KY
Congratulations, those are pretty neat, did you find it on eBay?
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 41
Threads: 4
Joined: Jun 2011
City: Fort Myers, FL
Mike
I have had the 7BX-10 and as it is a nice radio, the cabinet covering is not leather but vinyl, and it does not hold up as well especially on the sides.
Keith
Posts: 15,704
Threads: 551
Joined: Oct 2011
City: Jackson, NJ
Keith
Yes I thin standard issue 3bx and 7bx were vinyl, or at least it looks like it, usually yellow.
John
Yes, eBay.
There are two more on eBay right now, one recent (shown closed) and one has been there awhile - the condition and the price are a bit of a mismatch.
The auction was at 2am, so I set the alarm, and sniped $321.00 (last bid was $264). 1s before the end someone sniped so my bid came up to $314. The guy miscalculated by 7 bucks. Like myself with that Philco 16 2 weeks ago. I paid right there and went back to sleep.
(This post was last modified: 07-06-2014, 03:57 PM by morzh.)
Posts: 2,572
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
hey mike
think you better snipe a comfy bed soon for the garage
Posts: 3,138
Threads: 56
Joined: Apr 2011
City: Lexington, KY
The one you won looks pretty nice and it has a lot of the original literature which is a big plus. Now you'll be able to predict the weather with the built in barometer, temp, and humidity gauges.
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 15,704
Threads: 551
Joined: Oct 2011
City: Jackson, NJ
http://www.ebay.com/itm/1956-Stromberg-C...true&rt=nc
John
The one I ordered is here above unless you have the org listing yourself - the one I gave is just another AWP8.
Still looks nice.
Posts: 15,704
Threads: 551
Joined: Oct 2011
City: Jackson, NJ
Sam
You saw my hatch in the Jeep - always carry a sleeping back and a tent. Who knows where the night will find ya....or your honey's cast iron skillet....
Posts: 4,686
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
There is someone with a real crappy one in the Bellingham, Washington area, on Craigslist, they want like $400 and it has torn fabric and corrosion on the metal trim, needless to say it has not sold.
Regards
Arran
Posts: 15,704
Threads: 551
Joined: Oct 2011
City: Jackson, NJ
Oh I am sure there are those around. It's the nice ones that do not pop up often; most of those I've seen on eBay have discolorations, rusty bottom hinge, knobs in bad shape....and they want the same or higher amount for them than I've just paid.
Posts: 15,704
Threads: 551
Joined: Oct 2011
City: Jackson, NJ
Like this one on eBay
http://www.ebay.com/itm/350130241184?ssP...1423.l2649
Notice the trim finish all peeled off. And such. and the price is.....$394 BIN.
Posts: 41
Threads: 4
Joined: Jun 2011
City: Fort Myers, FL
Mike
That one on ebay from Mara Industrial has been up for sale at least 2 or 3 years!! You would think if he could not sell it for that price for this long that he would drop the price, plus it does'nt even work and is in rough condition.
Keith
Users browsing this thread:
|
Recent Posts
|
Philco 91 Speaker Replacement
|
The spider is glued on the cone and so is the voice coil. I think you can use a cotton swab dipped in acetone and carefu...RodB — 02:42 PM |
Restoring Philco 37-604C
|
Yes I saw that. If I knew, I'd probably try to arrange for getting it myself. But I have just got one.
Which does not m...morzh — 01:44 PM |
Philco 38-2 Automatic Tuning
|
When you push the lever, you are supposed to rotate the disk to the desired station.
Then the magnetic tuning will acqu...morzh — 01:42 PM |
Philco 38-2 Automatic Tuning
|
I figure out the muting from another picture that helped. Now I need to know how the automatic tuning works. When I push...dconant — 12:11 PM |
Philco 91 Speaker Replacement
|
How would I go about removing the spider from the cone?dconant — 12:04 PM |
Philco 38-2 Automatic Tuning
|
Hello, I am having trouble getting my automatic tuning to stay unmuted. If I play with the tuning handle I can get it to...dconant — 10:51 AM |
Does anyone make photofinish replacements?
|
Here’s the link to the DIY photofinish section of our site:
klondike98 — 09:46 AM |
Delco car radio Peko vibrator converstion issues
|
Hi Richard,
Thx for posting the schematic. As I remember as a kid, these were great performers for the time, likely...MrFixr55 — 08:56 AM |
Delco car radio Peko vibrator converstion issues
|
hello mr Fixr,
The Electro Powersupply that I am powering the radio with has a huge choke plus a 10,000ufd electrolyti...radiorich — 10:58 PM |
Delco car radio Peko vibrator converstion issues
|
How about putting a choke in the power supply?
The big cap was likely an attempt to stabilize the DC. Kids who cre...MrFixr55 — 09:19 PM |
Who's Online
|
There are currently no members online. |
|
|