Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

1931 Philco 111 lowboy - cant locate parts list
#1

Hello forum-
I just picked up a 1931 Philco 111 lowboy and searched nostalgia air for the schematic (also checked for 111-A). The schematics are there, but no parts list. As nostalgia air uses Rider's references, I assume that the parts list is also missing from Rider's, but that's only an assumption since I don't have the Rider's books. Any of you guys know of any other resource I could check? Thanks-
Mark
#2

Tried Chuck Schwark ?
#3

Use 111 parts list. The Rider lists them under the same sch, and the 111 has the BOM.
#4

In case you don't have this yet, I've posted the 111/111A parts list here:

https://picasaweb.google.com/lh/photo/gk...directlink
#5

Thanks Winky Dink - I owe you one!




Users browsing this thread: 3 Guest(s)
[-]
Recent Posts
RCA T62 is playing.....
So sometime  back I posted some photos of a badly damaged in transport T62, not the tank. I did manage to get a donor c...Paul Philco322 — 05:43 PM
Philco 40-120C Restoration
I found the problem. I had some faulty wiring on the field coil. Unfortunately, now I'm getting low voltage on the plate...bluecap — 05:21 PM
Philco 89 indicator light.
Is there some trick to getting the indicator lamp evenly spaced between the frequency bands? Seems like no matter what I...Jim Dutridge — 04:37 PM
Philco 40-120C Restoration
Hi David, Check the cathode bias resistor, it may have changed value. That will affect grid bias, etc. Also, verif...MrFixr55 — 03:26 PM
Philco 91 Restore Code ??
Hi DConnat,  Yes, the 42s are in Pentode Mode, cathode bias.  I am using the schematic from the Philco Library, Link ...MrFixr55 — 03:04 PM
Philco 40-120C Restoration
Not my radio just trying to help. DavidDavid — 02:48 PM
Philco 91 Restore Code ??
Thanks Rod. Since the screen grid is not tied to the plate then my tubes are pentode right? I see the candohm ties to th...dconant — 02:29 PM
Philco 91 Restore Code ??
Yes, you can look at the schematic. When the output tube screen grid is connected directly to the plate then it's wired ...RodB — 01:51 PM
Philco 91 Restore Code ??
Can someone tell me if my 42 tubes are connected triode or pentode in fixed or cathode bias? How could I tell by looking...dconant — 10:47 AM
Philco 40-120C Restoration
Hello David, that is great news about the tubes source being local ! Sounds like you got good start on the radio . ...radiorich — 09:41 AM

[-]
Who's Online
There are currently 2684 online users. [Complete List]
» 1 Member(s) | 2683 Guest(s)
Avatar

>