Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

RON! Original color for these radios
#1

Ok The 66 first. I am thinking the grill is medium walnut and the front is perfect brown. Some look like the sides and top are dark walnut but not sure..
Anyone know?

The 80 Jr next, Is there any toner on the grill? maybe a light walnut? It actually looks like a homey maple or something?? And the cabinet medium brown?
Any Ideas to the right colors?

I want them to be restored to original factory colors.

Thanks
Kirk

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#2

The following thread has Ron's comments on an 80 jr toning scheme. http://philcoradio.com/phorum/showthread.php?tid=6282
#3

Why cant I seem to find these when I look,
Thanks
Kirk

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#4

[Video: http://www.youtube.com/watch?v=FpOYuCn95dY]

66S: http://www.philcoradio.com/gallery/1935c.htm#n

You will note the area surrounding the grille, escutcheon and tuning knob is somewhat darker than Perfect Brown, but not as dark as Extra Dark Walnut. Several coats of Perfect Brown might replicate this color. Since Ultra Classic is dye-based instead of pigment based, you won't have to worry about multiple coats turning into paint (hiding the woodgrain).

Remainder of front panel: Medium Walnut (what is the Ultra Classic equivalent of Medium Walnut Tone Finish, anyway?)

Top, sides and trim: Extra Dark Walnut Ultra Classic, sparingly applied.

Now, I've seen some 66S sets that only had the dark walnut on the trim, and Medium Walnut on the side panels. I haven't seen enough original cabinets to establish which is correct (or if both are correct). Most of the 66S cabinets I have seen were stripped and refinished in a single Medium Walnut color. Icon_thumbdown

80 Jr.: http://www.philcoradio.com/gallery/1933a.htm#h (link goes to an 81 Jr., same colors)

Outer edges of front panel and sides: Perfect Brown, multiple coats as above to achieve a fairly dark finish that is not as dark as Extra Dark Walnut.

Bottom trim: Extra Dark Walnut

Inner front panel: I'm not sure about this. After studying several of these, I have to disagree with my previous comments in the link which Bob (klondike98 ) was kind enough to post above. It has to be something lighter than Medium Walnut...but I don't really know which shade. I think Light Fruitwood might be too light (tried it once, was not happy with the result). But Medium Walnut is too dark.

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Need to purchase some accessories for restoration of my Old Philco Radio
Here is a list of resources found in our online library that you might find useful. Mike's Gobs of Knobs email addres...klondike98 — 01:46 PM
First Radio restoration
Hi Tubeman, Welcome to the Philco Phorum.  Phamily Phriendly Pfun with Phine Pholks Phull of Philco Phacts. (See a p...MrFixr55 — 12:33 PM
First Radio restoration
You could post in the WANTED ADs section here on the Phorum and see if anyone has an RF generator that they want to sell...klondike98 — 11:55 AM
Zenith H725
Good ideas, thank you Arrange and Rich. I have the adhesive aluminum foil already and can try that immediately. More ...EdHolland — 10:18 AM
Graphics for majestic 1050 dial glass.
Murf; I found this thread on the ARF, the first photo has a pretty good view of the dial glass. Regards ArranArran — 01:12 AM
Zenith H725
hello Ed, how about that speacial tape used for ducting it's like foil or how about thin piece of aluminum roof flash...radiorich — 12:19 AM
Zenith H725
Ed; One material that I have seen, but never tried for this was material for making exhaust gaskets, it's similar to ...Arran — 11:42 PM
Zenith H725
I just remembered, I have some hi temp silicone rubber material which could do the trick. Or a piece of FR4 laminate. Th...EdHolland — 08:39 PM
Zenith H725
The PSU filter cap arrived today (thank you USPS!) so I will work on that later. Meanwhile, I have the dial, speaker...EdHolland — 06:42 PM
Philco 610B oscillator wiring
Thanks Terry. After checking my notes I think I recorded about -10v at the 6A7 G4/control grid. The screen grid (G3 &...Tubester — 05:59 PM

[-]
Who's Online
There are currently 1555 online users. [Complete List]
» 1 Member(s) | 1554 Guest(s)
Avatar

>