Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Can anyone identify this Pilot radio?
#1

   

   

   

   
#2

I have not seen one like that
looks like they tarred it and deco it ?
good luck Icon_thumbup
#3

Most unique, I am interested in Pilot as they manufactured in Lawrence, Massachusetts for a while. I have seen mostly large Pilot sets. I let a big one get away at our New England swap meet that had a very neat tuning feel to it, it was a huge table set. no room in the inn.

Good luck with it.

Paul

Tubetalk1
#4

Do you know it's a Pilot for sure? Knobs are similar but not the usual Pilot style knobs. Are there any markings on the tubes, bezel, capacitors, etc. to indicate a Pilot. I was trying to find the word 'Pilot' somewhere but no luck. Of course my eyes aren't what they once were but nothing is jumping out at me.

Craig R.
#5

Hello BrendaAnn,

I've checked my usual sources, but can't find this one. What does it do for a speaker? It appears that there is less here than meets the eye! Icon_e_wink What tubes are in the radio? 8 tubes for a broadcast band radio seems like a lot unless it is a radio/phono combo or it is part of a PA system. Also, I can't recall ever seeing a radio that tunes right to left, i.e., high portion of the band on the left. Interesting. Joe

Joe

Matthew 16:26 "For what does it profit a man if he gain the whole world, yet lose his own soul?"
#6

Possibly a Pilot T-1584, Vol 11 of Riders. The T-1684 is the same electronically but has push-button tuning. Joe

Joe

Matthew 16:26 "For what does it profit a man if he gain the whole world, yet lose his own soul?"
#7

Tube complement looks to be 5Y3, 6V6, 6SQ7, 2x 6SK7 or equiv., 6SA7, 6J5 and whatever that eye tube is. It does look like it has a phono input, which is probably what that 6J5 is used for (magnetic pickup?). The T-1684 doesn't look anything like this circuit. That one has a p-p output circuit and series heaters, whereas the radio posted is a transformer set with parallel heaters.

Hopefully once it gets here, I'll find more information somewhere on that chassis..




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
trying to identify this wire type
...and modern wire of the appropriate gauges and insulation V-rating (300V minimum, usually shown right on the wire) is ...morzh — 05:47 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
I have a question about this radio, is there anyone that has access to this radio that has an intact unmolested speaker ...captainclock1988 — 04:28 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
Well what makes me confuse all of those companies is that all three of those companies (Setchell-Carlson, Stromberg-Carl...captainclock1988 — 04:21 PM
trying to identify this wire type
The red wire is rubber covered wire. The others are cotton braid over rubber often in colors or a tracer, also strand...Chas — 02:43 PM
trying to identify this wire type
Greetings Phorum members, Hope you can help me identify this type of wire in the photo I have attached.  I am not sure ...georgetownjohn — 01:53 PM
Philco 60 Squealing
All correct shields must be in place, all tubes correct no subs of any kind. Check any soldered, riveted ground conne...Chas — 01:24 PM
Philco 60 Squealing
I have recapped and replaced out of tolerance resistors and so on. Radio plays nicely on fairly strong stations. The pro...dconant — 10:55 AM
Philco 46-420 Code 121 Reception issues
Welcome Eric, I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM
Philco 46-420 Code 121 Reception issues
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM
Philco 42-1008 conversion kit
Interesting. I haven't seen that before.klondike98 — 07:02 PM

[-]
Who's Online
There are currently no members online.

>