1929 Philco Model 86 Restore on Youtube
Posts: 289
Threads: 42
Joined: Jan 2014
City: Jeffersonville
State, Province, Country: PA
Howdy Buzz -
I'm restoring a 29' model 87 Lowboy and about to tackle the condenser bank myself. Would radial caps be a better fit than axial for this circuit?
Thanks,
Paul
Posts: 15,444
Threads: 539
Joined: Oct 2011
City: Jackson, NJ
Paul
Having done the same, the axias are better - easier to mount and create busses when needed.
Posts: 289
Threads: 42
Joined: Jan 2014
City: Jeffersonville
State, Province, Country: PA
Posts: 357
Threads: 58
Joined: Jan 2013
City: Portland, Oregon
1929 Philco Model 86 Restore on Youtube
Part 7 now uploaded
https://www.youtube.com/watch?v=P7wK4-YDRCY
Posts: 2,570
Threads: 336
Joined: Jun 2013
City: lawrenceville nj
buzz
great vids funny as H**l keep them coming ![Icon_clap Icon_clap](https://philcoradio.com/phorum/images/smilies/icon_clap.gif)
Posts: 357
Threads: 58
Joined: Jan 2013
City: Portland, Oregon
1929 Philco Model 86 Restore on Youtube
Part 8 now uploaded if interested
Buzz
https://www.youtube.com/watch?v=LgcaleMKk8g
Posts: 7,248
Threads: 266
Joined: Dec 2009
City: Roslyn Pa
Hey Paul
I repaired a model 87 a year or so ago. Did chronicle the work here on the Phorum. You can do a search to find it. One of my favorites of the early sets.Definitely use mylars in the power supply, I didn't and the input cap is shorted after abt 6 months of use (3hrs a day or so).
GL
Terry N3GTE
(This post was last modified: 09-14-2014, 07:39 AM by Radioroslyn.)
Posts: 289
Threads: 42
Joined: Jan 2014
City: Jeffersonville
State, Province, Country: PA
Hi Terry -
Thanks for the tip! I placed the cap order last week but did not order Mylars. I'll put in another order. Really appreciate the advice.
Regards,
Paul
Posts: 15,444
Threads: 539
Joined: Oct 2011
City: Jackson, NJ
111 is not unlike those, I also used films in the power filter. After all why use electrolytics where they were not before and the capacitance needed is 2uF tops.
(This post was last modified: 09-15-2014, 12:31 PM by morzh.)
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
I[m a great believer on the solen fast caps for low mfd power supply caps in radios. Tried e-caps in a Scott and blew out after 7 hours of running. Tried a new set with the cap cover off (stuffed) and an hour they were getting very warm. The Solen cap in there, cool. Same experience as Terry, different radio.
Best, Jerry
PS: Mike, I used them in my 111 and 112 as well!
A friend in need is a pest! Bill Slee ca 1970.
(This post was last modified: 09-15-2014, 03:05 PM by jerryhawthorne.)
Posts: 15,444
Threads: 539
Joined: Oct 2011
City: Jackson, NJ
Jerry,
I remember, you posted the photos in my thread.
As for the ecaps, when used in large pserul radios, one needs really to pay attention to the ripple ratings. I is not a cap's fault it is used under conditios outside the specifications.
And, unfortunately, ecaps of small capcitance also have small rippe current rating, a 20uF cap going possibly to 200-300 mA, which means that one needs to patallel-serialize them to meet the requirements. Good rule of thumb is, need an amp, rate an amp (very conservative folks go 5-fold). For continuous operation in enclosed space I would also rate at least 2-3 times the load.
But those caps sold by hobbyists websites are GP caps, not even high-ripple which you need several.
Yes a film cap is better, though I could never find their ripple specs.
(This post was last modified: 09-15-2014, 03:28 PM by morzh.)
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
Mike, you are correct, there are other things than voltage rating and mfd values that come into play. I like many people who are not a tune to things like ripple and current, learned the hard way. Easy to say a 2mfd cap at 500V on the schematic and find an e-cap will not last, with some neat disaster happening. Thank heaven the scott had a fuse. I'm certain poly caps will work fine, I like the solen fast caps as higher quality than the polys.
Best, Jerry
A friend in need is a pest! Bill Slee ca 1970.
Posts: 357
Threads: 58
Joined: Jan 2013
City: Portland, Oregon
1929 Philco Model 86 Restore on Youtube
Part 9 now uploaded if interested
Buzz
https://www.youtube.com/watch?v=KMCM-McSfgE
(This post was last modified: 09-22-2014, 07:54 PM by Buzz.)
Posts: 357
Threads: 58
Joined: Jan 2013
City: Portland, Oregon
1929 Philco Model 86 Restore on Youtube
Part 10 now uploaded if interested
Buzz
https://www.youtube.com/watch?v=aUkoNQYdh7o
Posts: 357
Threads: 58
Joined: Jan 2013
City: Portland, Oregon
1929 Philco Model 86 Restore Part 11
now uploaded, if anybody is interested.
https://www.youtube.com/watch?v=Cn5ekGqZ8Bc
Users browsing this thread:
|
Recent Posts
|
PT-6 antenna connections
|
Hi Bridcarl
+1 on the others. Pin 6 of the 7C6 is the AVC Diode so it is appropriate that that pin 4 of the coil con...MrFixr55 — 07:30 AM |
462ron
|
Joseph, this is beyond awesome. A lot of thought and engineering went into this and you hit a home run! Now I must save ...462ron — 07:27 AM |
Cannot Adjust an IF Transformer’s cores
|
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM |
Cannot Adjust an IF Transformer’s cores
|
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM |
PT-6 antenna connections
|
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM |
Cannot Adjust an IF Transformer’s cores
|
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM |
PT-6 antenna connections
|
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4.
Yes, pin 6 of the 7C6 is...RodB — 07:34 PM |
bridkarl
|
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM |
Cannot Adjust an IF Transformer’s cores
|
Joseph, now you are an engineer!!RodB — 06:37 PM |
PT-6 antenna connections
|
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM |
Who's Online
|
There are currently 4607 online users. [Complete List] » 1 Member(s) | 4606 Guest(s)
|
|
|
![>](https://philcoradio.com/phorum/images/bootbb/asb/right_arrow.png)
|