Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Also a newbie
#1

I'm attempting to become familiar with a Philco Transitone clock radio that my family gave to me on the occasion of my 60th birthday. This is my first vintage radio. I had mentioned a casual interest in trying to locate a 1954 model year radio. Now I have one!
My question: Where do I start?
I did do a search for pictures of this era Philco radio. What I come up with is a Model #53-701X. The radio pictured seems to be very close to what I have, but not exactly. Should I be looking for something like a # 54-701X?
I'm wondering if anybody could help me to get started on my familiarity of this clock radio? Will I be able to locate an original set of directions for this radio?
Any assistance would be greatly appreciated.
Thank you,
Bill Steach
bsteach@sbcglobal.net
#2

Hello and welcome!

You can find pictures of 1954 model Philcos here:

http://www.philcoradio.com/gallery/1954.htm

I looked up the 53-701 to familiarize myself with what you are looking for. If your Philco truly is a 1954 model, it should be either model B710 or B711. It was at the beginning of the 1954 season that Philco stopped using the model year prefixes and switched to a letter system (B=1954, C=1955, D=1956. etc.).

http://www.philcoradio.com/age.htm

--
Ron Ramirez
Ferdinand IN
#3

Hi Bill, welcome to the Phorum!!   Icon_wave  Lots of friendly people here always happy to answer questions. Of course you realize this may be your first in a long series of radios.  Once bitten by the bug it's hard to give it up!  
#4

Bill


Even if the radio is restored, be carefull operating it, Transitones are mostly AC/DC sets without transformers and present some hazard when used near grounded objects or in basements.
GFI outlet helps.

Mike


PS. If it has not been restored, do not attempt plugging it in.
#5

Welcome. Sri I don't have anything to offer regarding that particular radio but, again, welcome, and you have come to the right place..

-Also Bill
#6

WELCOME!!
#7

Welcome aboard and good luck with your radio.
#8

Welcome Bill! This may be your first old radio but I doubt it will be your last.

Gregb
#9

(10-08-2014, 02:27 PM)bsteach@sbcglobal.net Wrote:  I'm attempting to become familiar with a Philco Transitone clock radio that my family gave to me on the occasion of my 60th birthday. This is my first vintage radio. I had mentioned a casual interest in trying to locate a 1954 model year radio. Now I have one!
My question: Where do I start?
I did do a search for pictures of this era Philco radio. What I come up with is a Model #53-701X. The radio pictured seems to be very close to what I have, but not exactly. Should I be looking for something like a # 54-701X?
I'm wondering if anybody could help me to get started on my familiarity of this clock radio? Will I be able to locate an original set of directions for this radio?
Any assistance would be greatly appreciated.
Thank you,
Bill Steach
bsteach@sbcglobal.net
#10

Thank you for the greetings. I appreciate it. I imagine vintage radio collecting could become a bit of a hobby. I hope that I will keep my new venture in proper balance! Now I will now peruse the 1957 product line in an attempt to acquire one that is from my wife's birth year. Any recommendations?
Thank you also, Ron, for steering me directly to the 1954 models. My radio certainly appears to be a B710 rather than the depicted B711.
I do have a question. On the Sessions Movement clock, mine has a plug, or a blank cover, at the six o'clock position, whereas on the B-711 model there is a knob. Any information on an additional feature that is not on my clock?
Many thanks,
Bill
Sonoma, CA




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
38-10T chassis Restoration begins
Thanks for the info guys. I always wondered why the use of mica. Now I know.dconant — 01:52 PM
38-10T chassis Restoration begins
Most common plastics have a dielectric constant in the 3-4 range whereas mica is around 6. This means that even if you w...Steve D — 01:46 PM
38-10T chassis Restoration begins
It is acceptable but not desirable. Plastic is not an approved cap dielectric, and even though a reasonably thick piece...morzh — 11:52 AM
38-10T chassis Restoration begins
I have a question about the mica sheets. I thought I saw somewhere on the Phorum where someone used thin plastic report ...dconant — 10:44 AM
38-10T chassis Restoration begins
Yes, you should carefully remove the mica sheets from the trimmers otherwise you risk trapping foreign material in the t...RodB — 10:34 AM
American Bosch Model 802 auto radio
Hi Joe, Thank you again. The American Bosch Model 634A has the same tube lineup as my Model 802 and the parts layout dia...Antipodal — 03:09 AM
38-10T chassis Restoration begins
hello everyone, I know it has been a while since I have posted about this radio but finally got chance work on it . I ...radiorich — 02:45 AM
Rusty Tuning Condenser
You could soak the fins in vinegar. You have to be careful if any pot metal is involved because the vinegar will dissolv...RodB — 09:20 PM
Rusty Tuning Condenser
Hello, I have a Philco 91 where the tuning condenser fins are rusty. I magnet sticks to them so they can't be aluminium....dconant — 05:50 PM
American Bosch Model 802 auto radio
I’ve found six United Bosch auto radio’s with the same 6-tube line-up as the 802, on NostalgiaAir. They are models 150, ...Joe Rossi — 02:52 PM

[-]
Who's Online
There are currently 3704 online users. [Complete List]
» 4 Member(s) | 3700 Guest(s)
AvatarAvatarAvatarAvatar

>