Posts: 15,508
Threads: 543
Joined: Oct 2011
City: Jackson, NJ
http://jerseyshore.craigslist.org/atq/4655224956.html
For 30 bucks.
It is working too.
Though no one ever restored it. Was receiving a station when I came, and no hum either.
The guy hapened to be a colleague, plus we knew some mutual acquaintances, so we had a nice chat for some time.
He offered me another tabletop Philo, likely late 40s and a bakelite Z for free, but I did not take them.
Real close to me, 10 minutes maybe.
Posts: 736
Threads: 26
Joined: Jun 2013
City: Hayward, California
Posts: 344
Threads: 38
Joined: Jun 2011
City: Tustin
State, Province, Country: California
Very nice. You got a deal on that one
Posts: 1,462
Threads: 97
Joined: Jul 2012
City: Poughkeepsie, N.Y.
WOW only you could pull off a score like that....And maybe Oldrestorer!!!
Posts: 14
Threads: 2
Joined: Aug 2012
City: Dale, Wisconsin 54931
Hey,
No fair, the link expired, I wanna see too.
Posts: 15,508
Threads: 543
Joined: Oct 2011
City: Jackson, NJ
Posts: 4,370
Threads: 410
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
You know free is the right price! You have willpower Mike.
Paul
Tubetalk1
Posts: 14
Threads: 2
Joined: Aug 2012
City: Dale, Wisconsin 54931
Nice,
Real wood veneer, no photofinish?
Posts: 15,508
Threads: 543
Joined: Oct 2011
City: Jackson, NJ
Posts: 4,655
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
Too bad it wasn't a 37-640MX, but for $30 you can't go wrong if it's all there.
Regards
Arran
Posts: 15,508
Threads: 543
Joined: Oct 2011
City: Jackson, NJ
Other than cabinet, what's the difference?
Posts: 4,655
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
A nicer looking cabinet, with mahogany veneer it looks like, the chassis and the rest would be the same.
Regards
Arran
Posts: 3,131
Threads: 56
Joined: Apr 2011
City: Lexington, KY
I personally like the 640X cabinet styling a little better, but the 640MX seems less common with a production run of only 6,000 vs. 18,500 for the X. In any case that was a good find.... congratulations
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 15,508
Threads: 543
Joined: Oct 2011
City: Jackson, NJ
Actually as I am looking at it, I also do like 640X styling better. MX is a bit boxy for my taste though of course I would take it in also.
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Help with Readrite 410 tube tester
|
I fixed it. The filament selector switch is not that great of quality. Cleaned it and it takes some fiddling with to get...daveone23 — 06:58 AM |
Looking for place to donate unique Philco Philco J-1930 Prototype
|
It's a vacuum tube set and it's over 60 years old. My uncle acquired it for my parents when Philco was done with it, an...jeibner — 10:24 PM |
Looking for place to donate unique Philco Philco J-1930 Prototype
|
Hi J Eibner,
Welcome to the Phorum. Lots of Phriendly Pholks with Phine (See a pattern here?) advice.
It is very...MrFixr55 — 09:54 PM |
Philco 89B code 123 newbie
|
Or you can do what Terry suggests. Thx Terry for remembering that. A lot cheaper. I remember an article about that, b...MrFixr55 — 09:07 PM |
Philco 48-200 alignment questions
|
Thanks to everybody for all the info so far.
RodB, thanks for the additional info. I worked on this radio years ago a...transitony — 08:40 PM |
Philco 89B code 123 newbie
|
Now that I've been thinking about it somewhere I saw a replacement made using a section of pvc pipe and a cap to cover t...Radioroslyn — 08:25 PM |
Philco 48-200 alignment questions
|
Terry's gimmick cap is two insulated wires twisted together about 2 inches long, one wire attaches to the generator outp...RodB — 07:46 PM |
Philco 48-200 alignment questions
|
Hi, in this case I would be certain that pin 7, which is B-, of the 14A7 is not "hot". If it is then reverse t...RodB — 07:39 PM |
Philco 48-200 alignment questions
|
Yup.
The gimmick is to take the place of the 100mmfd cap you don't have.Radioroslyn — 07:34 PM |
Philco 48-200 alignment questions
|
Thanks for the reply Terry.
Yes I am definitely using an isolation transformer. If I work with your method and connec...transitony — 07:29 PM |
Who's Online
|
There are currently 2117 online users. [Complete List] » 2 Member(s) | 2115 Guest(s)
|
|
|
|