Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

40-180?
#1

I am the proud owner of a 40-155 with a 40-180 chassis inside. I know next to nothing about this radio. Where may I find information regarding how the various dials and buttons work, (all the labels are long gone). So far I have tested all the tubes and found out if I press the red button on the far right, I can use the tuner and actually find a couple of stations. I am sure I could do better if I knew what all the settings were. Thanks.
#2

Ok, it took a bit of hunting, but I found descriptions of what the functions are for the buttons and dials on the 40-180. I really appreciate the information presented here, Thanks.
#3

Sorry, I somehow managed to miss your original post. Did you find the functions for all of the buttons and knobs? If so, you now know that the far right pushbutton must be pushed in for manual tuning.

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
46-1213 Schematic Question
In the photo of my Chassis, I now have two wires marked "A" and "B", these are my power cord wires. ...MissouriLarry — 02:46 PM
46-1213 Schematic Question
Gary, Thanks for the reply!  I have no intention of introducing any electric to my radio until I recap it.  I just want...MissouriLarry — 02:14 PM
46-1213 Schematic Question
Hi Larry, Usually you'll want to attach the hot side of the power line cord to the power switch. That way when the s...RodB — 02:06 PM
1934 American Bosch 440T restore on YouTube
That's an interesting radio Buzz! Great first video also...Eliot Ness — 01:59 PM
46-1213 Schematic Question
Hello Larry. Replacement of the power cord is a priority, but not the first. All paper and electrolytic capacitors nee...GarySP — 01:36 PM
46-1213 Schematic Question
Ok, now is time to post my first question.  I have a Philco 46-1213 that I am going to start working on here real shortl...MissouriLarry — 12:48 PM
Another amp build - here I go again!
Well, never enough yet how much is too much? I ordered some spare parts from a couple vendors in China and now have ship...TV MAN — 10:49 AM
A Marconi model 86
This Marconi was a bit of a challenge. It was totally missing one electrolytic  capacitor, and the photos show a couple ...Dan Walker — 10:48 AM
Philco 42-345 Restoration/Repair
With regard to the speaker, unless the cone is so brittle that it crumbles as soon as you touch it I would try to repair...Arran — 04:07 AM
Philco 42-345 Restoration/Repair
That silver can capacitor is an aluminum electrolytic. You should replace it with an aluminum electrolytic with the valu...RodB — 11:46 PM

[-]
Who's Online
There are currently 467 online users. [Complete List]
» 3 Member(s) | 464 Guest(s)
AvatarAvatarAvatar

>