Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

New (to me) 57C
#1

Sorry, I am coming in late on this thread.  I have a Philco 57C that has been refurbished.  I am attempting to use it at my office.  Is it possible to use a home built antenna inside that will give me some reception?  I can pick up one station without too much effort (holding wire up to the 2 antenna connections).  I am very much a newby with these radios.

Thanks!

Rob
#2

locostbamboo
welcome to the phorum
guess it depends on what kind of office your in old building or new.  on how well it would work 
best to use long wire around or under carpet  with ground wire to water pipe or heater duct.
you can spend few bucks to get am transmitter and use that way you play any thing you like
sam
#3

Not exactly true, but close.  I bought the 57C at an auction years ago and my father knew someone who got it working for me.  It has a newer power cord and I believe had a tube or two replaced.  I am interested in any thoughts on an antenna.  I have it at work and my office is in the middle of a concrete building (old Best Buy).  I had a suggestion on an AM transmitter which sounds very promising.  I would appreciate any advice offered.

Thanks.

Rob in Oregon


Attached Files Image(s)
   
#4

Thank you Mafiamen.  I think the AM transmitter sounds really cool.  I did some research and it looks like I might be able to build one  (I am cheap)!  Icon_smile

I appreciate this and any other advice!

Rob
#5

moved post to keep in one place Icon_thumbup

hi rob
if going with am transmitter  one I use and most here I think use is
  sstran you build it your self comes as  kit but you need to know how to soldier as parts  are small
but worth it  about 100.
then you can use ipod or phone or computer to play what you like




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco Model 80 Transformer resistance
Just forget this number, it is useless anyway. Simply proceed with your project.morzh — 10:08 PM
Philco Model 80 Transformer resistance
My $0.02 is that it is a misprint. I tried to look up the value for the similar 84 and 37-84, and ther is no resistance...MrFixr55 — 09:51 PM
Philco Model 80 Transformer resistance
Thanks for the quick reply! Hmm...well that's good, so what am I seeing that's 1042 ohms on the schematic for the pow...Mike L — 08:46 PM
Philco Model 80 Transformer resistance
The DC resistance of the primary is 8 to 9 Ohm.morzh — 07:54 PM
Philco Model 80 Transformer resistance
I have a feeling the primary winding on the power transformer is bad. My resistance reading on the primary side is 9 ohm...Mike L — 07:48 PM
Rusty Tuning Condenser
I would try Naval Jelly and use a soaked pipe cleaner to get it where it needs to go.RossH — 06:56 PM
38-10T chassis Restoration begins
Hello Dconant , they sold mica to use as a insulator between transistors and their heatsinks too. Rob I will remove th...radiorich — 02:52 PM
38-10T chassis Restoration begins
Thanks for the info guys. I always wondered why the use of mica. Now I know.dconant — 01:52 PM
38-10T chassis Restoration begins
Most common plastics have a dielectric constant in the 3-4 range whereas mica is around 6. This means that even if you w...Steve D — 01:46 PM
38-10T chassis Restoration begins
It is acceptable but not desirable. Plastic is not an approved cap dielectric, and even though a reasonably thick piece...morzh — 11:52 AM

[-]
Who's Online
There are currently no members online.

>