Posts: 2,026
Threads: 367
Joined: Jun 2010
City: Dover, OH
At least I am pretty sure that is what this is as the model tag is missing. Got a call on this from a shop and fellow collector right before work yesterday. He stated he was selling the 'Biggest Philco Tombstone" he had ever seen for someone and thought he'd better get me over there before it either sold or he got too tempted to buy it. After hearing his description, I went up this morning right after he opened his shop and now own the king of the Philco tombstones! Great sounding set if I may say so, maybe a bit better than my 116X which is acting like it has a flaky tube.
The pros: It's a 116B! It's complete. It plays well. Electrolytics appear to have been replaced sometime in the past. Veneer is good.
The cons. Crappy refinish job. Patched speaker (sounds ok). Grill cloth is shot. Still has a lot of original capacitors. Cost me $225 to get.
No matter where you go, there you are.
Posts: 1,824
Threads: 114
Joined: Jul 2014
City: Sneedville, TN
Wow ! Great set ! I'm sure you will have fun restoring it properly. I really look forward to following your progress. Please keep the pictures coming. They are so informative. As they say, " one picture worth one thousand words." As for the price, I think I might have paid that myself for a set in that condition, no seriously difficult issues. I'm a sucker for these old multi-band sets. Best of luck with the restoration !
Posts: 479
Threads: 73
Joined: Mar 2012
City: Riverside, CA
Nice looking set! Keep us all posted with your progress.
- Geoff
Posts: 344
Threads: 38
Joined: Jun 2011
City: Tustin
State, Province, Country: California
Very nice! The 116 is a great set. It's the best table top Philco ever made and the 10" speaker gives it that "console" sound.
Nice that the veneer is good as it will make for an easy refinish
Posts: 4,708
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
The 116B is a good performer, but it probably has the least appealing cabinet of all the 16B/116Bs. I'm not sure that I would have paid as much as that for one myself, very likely not, it wasn't a rip off but it wasn't a bargain either. However you wanted one that played and I am somewhat indifferent to that, I don't really trust anyone else's work unless I can see what was done or know who did it, so I'm unwilling to pay extra for that.
Regards
Arran
Posts: 2,026
Threads: 367
Joined: Jun 2010
City: Dover, OH
I was willing to pay the price for several reasons. One being that these just don't pop up around here. Tombstone and cathedral radios in general around here are not common to find outside of collections and when they do come up for sale, they usually demand a bit of a price and don't last long. Yes, I have lucked out the past couple years, but that was just it, LUCK! Other than the mid-century crap, these seem to be the only type radios people are looking for lately and I've heard they even bring way better prices at the Estes sales than even a nice, common console will lately. Also, the older gentleman who wanted this radio sold was no dummy and had done his research. Basically, for me, this is a once in a lifetime radio and the fact I was given first dibs really helped on my decision.
As for sound, this radio definitely has that console sound. I listened to it for an hour in my bedroom this even with no issues and a couple family members actually mistook it for the stereo I got not too long ago. Actually, that is a bit of an insult to the Philco!
No matter where you go, there you are.
Posts: 344
Threads: 38
Joined: Jun 2011
City: Tustin
State, Province, Country: California
I don't think it was over priced. You don't see the 116's often. The fact that it plays is always a big plus even if you want to go over the last persons cap job. I haven't bought a 116 as of yet, but I do have a 16B and the performance/sound is awesome. The 10" speaker Philco put in these sets have a deep, full sound.
Posts: 1,983
Threads: 149
Joined: Jan 2013
City: Westland, MI
Nice find! Seems a little pricey for me, but it is a difficult set to find. What happened to thinning down?? Take care, Gary
"Don't pity the dead, pity the living, above all, those living without love."
Professor Albus Dumbledore
Gary - Westland Michigan
Posts: 2,026
Threads: 367
Joined: Jun 2010
City: Dover, OH
I am still trying to thin down, but no-one is buying right now. I might still have to go the auction route next spring the way things are going. That said, radios like the 116B are still on my list to get and there was no way I was going to say no to a complete, working example. Same would go for a 37-690 or 38-690. Even so, I actually did rethink even this radio before going to get it yesterday.
No matter where you go, there you are.
Posts: 3,135
Threads: 54
Joined: Apr 2011
City: Lexington, KY
Nice score Jayce. Doesn't really matter what anyone else would have paid for it as long as you're happy with the deal. Prices vary widely according to location and that isn't a radio you'd want someone trying to ship. Fortunately that grille cloth is being reproduced again. Enjoy and keep us updated.....
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Users browsing this thread: 2 Guest(s)
|
Recent Posts
|
Philco Model 80 Transformer resistance
|
Just forget this number, it is useless anyway.
Simply proceed with your project.morzh — 10:08 PM |
Philco Model 80 Transformer resistance
|
My $0.02 is that it is a misprint. I tried to look up the value for the similar 84 and 37-84, and ther is no resistance...MrFixr55 — 09:51 PM |
Philco Model 80 Transformer resistance
|
Thanks for the quick reply!
Hmm...well that's good, so what am I seeing that's 1042 ohms on the schematic for the pow...Mike L — 08:46 PM |
Philco Model 80 Transformer resistance
|
The DC resistance of the primary is 8 to 9 Ohm.morzh — 07:54 PM |
Philco Model 80 Transformer resistance
|
I have a feeling the primary winding on the power transformer is bad. My resistance reading on the primary side is 9 ohm...Mike L — 07:48 PM |
Rusty Tuning Condenser
|
I would try Naval Jelly and use a soaked pipe cleaner to get it where it needs to go.RossH — 06:56 PM |
38-10T chassis Restoration begins
|
Hello Dconant ,
they sold mica to use as a insulator between transistors and their heatsinks too.
Rob I will remove th...radiorich — 02:52 PM |
38-10T chassis Restoration begins
|
Thanks for the info guys. I always wondered why the use of mica. Now I know.dconant — 01:52 PM |
38-10T chassis Restoration begins
|
Most common plastics have a dielectric constant in the 3-4 range whereas mica is around 6. This means that even if you w...Steve D — 01:46 PM |
38-10T chassis Restoration begins
|
It is acceptable but not desirable.
Plastic is not an approved cap dielectric, and even though a reasonably thick piece...morzh — 11:52 AM |
Who's Online
|
There are currently no members online. |
|
|