Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Gilfillan Model 96 schematic
#1

I recently rescued a Gilfillan model 96. Most of the tubes were gone.
My riders does not reference a model 96 so any ideas on tracking down a schematic would be welcome.
The dial scale is also in bad shape. Anyone who might be able to scan a decent one please let me know. Thanks

       
#2

My Gernsback Service manual index shows a schematic for a 96B and a 96X. The B uses Metal-Glass tubes and the X uses Metal tubes:

http://www.radiomuseum.org/r/gilfillan_96.html

Send me a PM with your e-mail address and I'll send you a PDF copy.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#3

(12-26-2014, 02:48 PM)Eliot Ness Wrote:  My Gernsback Service manual index shows a schematic for a 96B and a 96X.  The B uses Metal-Glass tubes and the X uses Metal tubes:

http://www.radiomuseum.org/r/gilfillan_96.html

Send me a PM with your e-mail address and I'll send you a PDF copy.

PM sent thank you
#4

Schematic sent, hope it helps!

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#5

Thanks John

This is great.

Roy
#6

Please keep us updated as you progress on this pretty rare set.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM

[-]
Who's Online
There are currently 4199 online users. [Complete List]
» 1 Member(s) | 4198 Guest(s)
Avatar

>