Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

battery P-274
#1

hey guys
I am looking for info for  P-274 battery  seams to be nothing on internet about them
need one for a philco E-678 portable  radio need schematic to
thanks sam
#2

If you can give me the voltages for the B section and A section of the battery pack, and the dimensions of the area it fits, I can explain how to make yourself a suitable replacement. I guess you will have to get a schematic first to find that. Also, you might try posting this in the "electronic repair" section. It might get more notice by the electronic restorers. You can see how I rebuilt the battery for my own Philco portable here : http://philcoradio.com/phorum/showthread.php?tid=10725  and here : http://philcoradio.com/phorum/showthread.php?tid=10728  . Best of luck with this project.
#3

Agree, get schematic, find out voiltages needed, and you can put together inexpensive 9 volt batteries for B+ and a couple of C or D batteries for filaments, and AA's for bias if needed. Else you can build easily a plug in battery elimiter, tons of stuff here and on web. Posts already given are great advice!




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 91 Speaker Replacement
The spider is glued on the cone and so is the voice coil. I think you can use a cotton swab dipped in acetone and carefu...RodB — 02:42 PM
Restoring Philco 37-604C
Yes I saw that. If I knew, I'd probably try to arrange for getting it myself. But I have just got one. Which does not m...morzh — 01:44 PM
Philco 38-2 Automatic Tuning
When you push the lever, you are supposed to rotate the disk to the desired station. Then the magnetic tuning will acqu...morzh — 01:42 PM
Philco 38-2 Automatic Tuning
I figure out the muting from another picture that helped. Now I need to know how the automatic tuning works. When I push...dconant — 12:11 PM
Philco 91 Speaker Replacement
How would I go about removing the spider from the cone?dconant — 12:04 PM
Philco 38-2 Automatic Tuning
Hello, I am having trouble getting my automatic tuning to stay unmuted. If I play with the tuning handle I can get it to...dconant — 10:51 AM
Does anyone make photofinish replacements?
Here’s the link to the DIY photofinish section of our site: klondike98 — 09:46 AM
Delco car radio Peko vibrator converstion issues
Hi Richard, Thx for posting the schematic.  As I remember as a kid, these were great performers for the time, likely...MrFixr55 — 08:56 AM
Delco car radio Peko vibrator converstion issues
hello mr Fixr, The Electro  Powersupply that I am powering the radio with has a huge choke plus a 10,000ufd electrolyti...radiorich — 10:58 PM
Delco car radio Peko vibrator converstion issues
How about putting a choke in the power supply? The big cap was likely an attempt to stabilize the DC. Kids who cre...MrFixr55 — 09:19 PM

[-]
Who's Online
There are currently 3611 online users. [Complete List]
» 2 Member(s) | 3609 Guest(s)
AvatarAvatar

>