I finally found a good one!
Posts: 236
Threads: 43
Joined: Oct 2010
City: Atlantic Highlands, NJ
Everytime I find one of these it has cracked veneer on the top curved portion, this one is ok. I've wanted one for several years. This was on CL for 3 hours when I saw it stting in my in-laws in Queens tonight. Kirk, it wasn't far from you in Belmore. I flew over and paid $60 for it. Now to get it home. One thing I noticed on this and all the others I saw was the top gets loose and if you try to pick it up it will come off and crack the curved portion of the veneer. I'll bring some glue and clamps next time I visit to bring it home.
It is missing a clarifier and the dial and glass. I have two parts chassis and a broken cabinet with those parts in tact.
Steve
[Image: http://i1033.photobucket.com/albums/a414...75ed19.jpg]
Posts: 2,579
Threads: 338
Joined: Jun 2013
City: lawrenceville nj
steve
nice find and steal
I`ll be over to pick up don`t tell mike 
sam
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 236
Threads: 43
Joined: Oct 2010
City: Atlantic Highlands, NJ
(01-17-2015, 10:51 PM)sam Wrote: steve
nice find and steal
I`ll be over to pick up don`t tell mike
sam
I have to hide it now!
Posts: 18,427
Threads: 622
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
I have one, I do not need another one.....but nice buy nevertheless.
Posts: 1,474
Threads: 98
Joined: Jul 2012
City: Poughkeepsie, N.Y.
Posts: 236
Threads: 43
Joined: Oct 2010
City: Atlantic Highlands, NJ
Thanks John. It seems there are still a lot of them out there, just never close to me until now.
Posts: 2,579
Threads: 338
Joined: Jun 2013
City: lawrenceville nj
 I know where their is a nice old corvette
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 236
Threads: 43
Joined: Oct 2010
City: Atlantic Highlands, NJ
(01-20-2015, 08:34 PM)sam Wrote: I know where their is a nice old corvette
Now I have to hide that too!
Posts: 2,579
Threads: 338
Joined: Jun 2013
City: lawrenceville nj
Come on share your toys 
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 236
Threads: 43
Joined: Oct 2010
City: Atlantic Highlands, NJ
If you help me put it back together maybe. It is in a least 100 pieces right now.
Posts: 344
Threads: 38
Joined: Jun 2011
City: Tustin
State, Province, Country: California
Nice radio! $60 is a steal 
Posts: 499
Threads: 15
Joined: Mar 2013
City: Weymouth Ma
(01-17-2015, 10:19 PM)SteveJB Wrote: Everytime I find one of these it has cracked veneer on the top curved portion, this one is ok. I've wanted one for several years. This was on CL for 3 hours when I saw it stting in my in-laws in Queens tonight. Kirk, it wasn't far from you in Belmore. I flew over and paid $60 for it. Now to get it home. One thing I noticed on this and all the others I saw was the top gets loose and if you try to pick it up it will come off and crack the curved portion of the veneer.
That's how I got mine. The previous owner picked it up by the top and just about pulled it off. The front is cracked and you could probably lift it off with out too much effort. It was good to get at the time but I don't see getting to it soon. Good luck with yours.
Henry
Posts: 236
Threads: 43
Joined: Oct 2010
City: Atlantic Highlands, NJ
Thanks Henry, the curved veneer is very hard to repair. I will use my other one as a parts set to fix this one.
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
Philco 71 Code 125
|
| Hello,
I am in need of a schematic for this radio. Mine has the three separate circular tube shields and a shadow me...dconant — 08:06 AM |
|
Stromberg Carlson 1500 Squeal
|
| And life just keeps getting more complicated.dconant — 07:57 AM |
|
54C Complete Teardown/Rebuild
|
| Hello Roy,
here is this one
sincerely Richardradiorich — 12:45 AM |
|
54C Complete Teardown/Rebuild
|
| Richard,
Had grabbed it already but thank you just the same. I find myself wanting to find some way to block out the...glyphmon — 12:03 AM |
|
54C Complete Teardown/Rebuild
|
| Hello roy,
here is a link to the schematic .
Sincerely Richardradiorich — 11:54 PM |
|
54C Complete Teardown/Rebuild
|
| Richard,
The Silvertone 2014 also is a transformerless set, so I am incorporating a 1:1 600 ohm audio isolation transfo...glyphmon — 11:37 PM |
|
Preliminary work on wife's Silvertone 2014
|
| Did an alignment today which was interesting. IF alignment went great, almost all was already spot-on. Adjusting on th...glyphmon — 11:35 PM |
|
54C Complete Teardown/Rebuild
|
| The main problem with adding a Bluetooth input is that this set lacks a traditional power transformer to isolate it from...radiorich — 11:19 PM |
|
54C Cabinet Refinish
|
|
I started stripping this cabinet before it got super chilly out because I knew I wasn't going to be able to work on ...glyphmon — 11:18 PM |
|
54C Complete Teardown/Rebuild
|
| While I'm waiting to wrap up the final steps on my wife's Silvertone 2014, I started disassembly on the next project. O...glyphmon — 11:07 PM |
|
Who's Online
|
There are currently 2717 online users. [Complete List]
» 4 Member(s) | 2713 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
