I finally found a good one!
Posts: 236
Threads: 43
Joined: Oct 2010
City: Atlantic Highlands, NJ
Everytime I find one of these it has cracked veneer on the top curved portion, this one is ok. I've wanted one for several years. This was on CL for 3 hours when I saw it stting in my in-laws in Queens tonight. Kirk, it wasn't far from you in Belmore. I flew over and paid $60 for it. Now to get it home. One thing I noticed on this and all the others I saw was the top gets loose and if you try to pick it up it will come off and crack the curved portion of the veneer. I'll bring some glue and clamps next time I visit to bring it home.
It is missing a clarifier and the dial and glass. I have two parts chassis and a broken cabinet with those parts in tact.
Steve
[Image: http://i1033.photobucket.com/albums/a414...75ed19.jpg]
Posts: 2,573
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
steve
nice find and steal
I`ll be over to pick up don`t tell mike 
sam
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 236
Threads: 43
Joined: Oct 2010
City: Atlantic Highlands, NJ
(01-17-2015, 10:51 PM)sam Wrote: steve
nice find and steal
I`ll be over to pick up don`t tell mike
sam
I have to hide it now!
Posts: 16,496
Threads: 573
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
I have one, I do not need another one.....but nice buy nevertheless.
Posts: 1,469
Threads: 97
Joined: Jul 2012
City: Poughkeepsie, N.Y.
Posts: 236
Threads: 43
Joined: Oct 2010
City: Atlantic Highlands, NJ
Thanks John. It seems there are still a lot of them out there, just never close to me until now.
Posts: 2,573
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
 I know where their is a nice old corvette
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 236
Threads: 43
Joined: Oct 2010
City: Atlantic Highlands, NJ
(01-20-2015, 08:34 PM)sam Wrote: I know where their is a nice old corvette
Now I have to hide that too!
Posts: 2,573
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
Come on share your toys 
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 236
Threads: 43
Joined: Oct 2010
City: Atlantic Highlands, NJ
If you help me put it back together maybe. It is in a least 100 pieces right now.
Posts: 344
Threads: 38
Joined: Jun 2011
City: Tustin
State, Province, Country: California
Nice radio! $60 is a steal 
Posts: 496
Threads: 15
Joined: Mar 2013
City: Weymouth Ma
(01-17-2015, 10:19 PM)SteveJB Wrote: Everytime I find one of these it has cracked veneer on the top curved portion, this one is ok. I've wanted one for several years. This was on CL for 3 hours when I saw it stting in my in-laws in Queens tonight. Kirk, it wasn't far from you in Belmore. I flew over and paid $60 for it. Now to get it home. One thing I noticed on this and all the others I saw was the top gets loose and if you try to pick it up it will come off and crack the curved portion of the veneer.
That's how I got mine. The previous owner picked it up by the top and just about pulled it off. The front is cracked and you could probably lift it off with out too much effort. It was good to get at the time but I don't see getting to it soon. Good luck with yours.
Henry
Posts: 236
Threads: 43
Joined: Oct 2010
City: Atlantic Highlands, NJ
Thanks Henry, the curved veneer is very hard to repair. I will use my other one as a parts set to fix this one.
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
Philco model 40-100
|
| That was part pf what began my interest in tube battery radios, the variety of circuit designs, especially by Grimes-Pho...Arran — 02:37 PM |
|
Studebaker/Philco AC-2687 car radio
|
| Phill;
I had a look at my Riders "Specialized" car radio books yesterday, I don't have one that covers Stud...Arran — 01:50 PM |
|
Philco Model 249 made in England
|
| Thanks for the information MrFixr55. It's tube amplification and not solid state.
TOMfklown — 11:27 AM |
|
Philco Model 249 made in England
|
| Well, I’ll be! I learned something.jrblasde — 11:03 AM |
|
Philco Model 249 made in England
|
| Yes, Garrard was well-regarded for its standalones.morzh — 10:48 AM |
|
Philco 46-480 Electronic Restoration
|
| Quite the interesting stories, sir! Somewhat reminds me of my first job out of school (not that I worked in a similar fi...jrblasde — 09:33 AM |
|
Philco model 40-100
|
| Arran, I restored 2 Canadian battery-crank telephones for a friend a while ago, a Northern Electric (Canadian version of...MrFixr55 — 08:04 AM |
|
Road Trip for a Philco 46-480
|
| Beautiful work, a 79 year old radio brought back to life. The first FM radios for me, a little iffy, had some I just cou...Jimradio — 08:01 AM |
|
Philco 46-480 Electronic Restoration
|
| I was a field engineer for a biomedical company for many years. Many was the time that I was driving home from NYC in t...MrFixr55 — 06:40 AM |
|
Philco 46-480 Electronic Restoration
|
| Don't laugh folks, I have not been above taking a chassis into the bathtub (when Ms. Fixr was out of the house), taping ...MrFixr55 — 06:02 AM |
|
Who's Online
|
There are currently 1191 online users. [Complete List]
» 5 Member(s) | 1186 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
