Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
I just finished the chassis inside this radio:
[Image: http://www.philcoradio.com/images/phorum...88_058.jpg]
It's too cold here to start doing any cabinet work yet, but I wanted to show you what the cabinet of this radio looks like and also illustrate many of its problem areas.
First of all, I should mention that there should be small wood blocks inside the cabinet, which the tops of both dial scales should be screwed onto to hold them in place. These blocks are missing inside the cabinet. This should not be a big deal to reproduce.
It's the many faults in the veneer that is going to be the problem.
Looking at the left side, you will notice many "fleabites" along the edge.
[Image: http://www.philcoradio.com/images/phorum...88_059.jpg]
The right side has even larger places where veneer is missing:
[Image: http://www.philcoradio.com/images/phorum...88_060.jpg]
Top right, above the right "spread-bands" dial: Notice that not only is a chunk of top layer veneer is missing, but the substrate is gone as well:
[Image: http://www.philcoradio.com/images/phorum...88_061.jpg]
And...the entire strip of decorative tiger-stripe walnut, with the grain running vertically, is missing above both dials and the speaker grille opening:
[Image: http://www.philcoradio.com/images/phorum...88_062.jpg]
I was going to seek help in repairing this cabinet from one of the fine artisans here on the Phorum, but with me still out of work, I think I am going to have to tackle it myself.
I am open to suggestions.
--
Ron Ramirez
Ferdinand IN
Posts: 2,572
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
One word
KIRK.
Say the word boss I'll muscle him over
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 1,475
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
Posts: 3,135
Threads: 54
Joined: Apr 2011
City: Lexington, KY
Yeah, Kirk will probably trade chassis work for cabinet work.
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 825
Threads: 113
Joined: Aug 2012
City: The Villages
State, Province, Country: Florida
Wow, Kirk is awful quiet
Eric
The Villages, FL
Member: Philco Phorum, ARF, ARCI & Radiomuseum.org
Posts: 15,823
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
Psst....He owns the housssssse......
Posts: 1,703
Threads: 55
Joined: Sep 2005
City: Evanston, IL
C'mon Kirk! Wake up!
:-)
Work is knocking at yer door!
Chuck
Posts: 2,572
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
Posted by morzh - Yesterday, 10:32 pm
Psst....He owns the housssssse......
no the house owns him
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 4,109
Threads: 310
Joined: Nov 2013
City: Kings Park NY
ME!!!! QUIET!!! NEVER!!!
Send it over and I will veneer it for you.
The house is sucking up my time but I am moving in already a little at a time. Tonight is drinking night and updating my posts,
P.M. me for my address and I'll get it done when I can... After Mikes nightmare cabinet!. Cant tone or anything due to winter but can do the veneer.
Happy Thursday Boys and Gal,
P.S. Why always me? What about Steve or Todd or Russ,
Kirk
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
(This post was last modified: 01-30-2015, 06:02 AM by OldRestorer.)
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Kirk
Seriously?!?
Wow...thanks ! Yes, to be honest, I think I would rather do the toning/finishing myself. Even though I think you would do a better job at it than I would, just repairing the veneer issues would be a big help.
I'll have to have some custom decals made for this cabinet. I'm not going to use the currently available decals for this one as they are not to my liking. Yah, I'm being picky.
--
Ron Ramirez
Ferdinand IN
Posts: 2,572
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
WHAT ???
the boss asks once and you jump to it
poor mike has to do all your stinky chassis and drink your moldy beer
just so you can do a few small cabinets for him
and I drank same moldy beer no Chinese and you still will not do my cabinets
well of all the nerve
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 4,109
Threads: 310
Joined: Nov 2013
City: Kings Park NY
Sam, You know you can drop off a cabinet any time!
Mikes cabinets are small?
What are you smoking?
Don't worry Mike, yours have priority and Now there is less chassis for you to fix!
Kirk
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
You guys are making me feel bad.
--
Ron Ramirez
Ferdinand IN
Posts: 4,109
Threads: 310
Joined: Nov 2013
City: Kings Park NY
Oh stop Ron,
What is the fun of the hobby if you cant ruin someone elses cabinet.. I mean restore,
Besides, I get to say that I restored a cabinet for the famous author; Ron Ramirez!
We made a fair deal Sam, He is letting me restore it if I pay shipping both ways
Kirk
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 2,572
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
kirk
Besides, I get to say that I restored a cabinet for the famous author; Ron Ramirez!
We made a fair deal Sam, He is letting me restore it if I pay shipping both ways [Image: http://philcoradio.com/phorum/images/smi...rgreen.gif]
using ron to get famous
ron all in good fun don`t take it serious please
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Users browsing this thread: 2 Guest(s)
|
Recent Posts
|
Philco 60 Squealing
|
I'm pretty sure I now have the litz wire soldered. This did not make any difference. Back in April I rewound the seconda...dconant — 06:25 PM |
Philco 38-7 Speaker
|
Just to make sure, you chose either 4 ohm into 5K or into 10K? (blk-org or blk-grn)morzh — 06:23 PM |
Philco 38-7 Speaker
|
I have let this one sit because of other duties. Now I am back, and I have a couple of questions. I hooked up a Hammond ...tludka — 05:34 PM |
Philco 42-390, code 121 speaker
|
>>A closer examination of the very small print schematic indicates that the speaker is a PM type.
This shows a ...morzh — 05:18 PM |
Philco 60 Squealing
|
Litz is typically tinned by simply rubbing it with the soldering iron tip while immersed in solder (and a bit of rosin f...morzh — 05:14 PM |
Philco 6K7
|
The suppressor grid (if by G3 you mean the S) is usually at the Cathode potential, which in this caes is GND.
I am not ...morzh — 05:10 PM |
Philco 16B Parts
|
Thanks for the reply. Unfortunately the radio was removed before bidding was over so I didn't get a chance to bid.dconant — 04:10 PM |
Philco 16B Parts
|
Hi Dan,
Mike is correct, there's a lot of painted stuff on the chassis but it looks pretty good. The sm is all there,sp...Radioroslyn — 03:50 PM |
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
|
Hi Cap'n Clock,
Unfortunately, I do not have this radio. This is a shame because this should be a good performer. 2A...captainclock1988 — 03:43 PM |
Philco 42-390, code 121 speaker
|
Using a 5W 1.5k ceramic resistor in place of the field coil and using a 4 ohm PM speaker, I was able to bring the radi...Stevelog — 02:57 PM |
Who's Online
|
There are currently 3850 online users. [Complete List] » 4 Member(s) | 3846 Guest(s)
|
|
|
|