Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 42-345 grille cloth and knob decals
#1

Hi guys. I was wondering if a person can get exact replacement grille cloth and decals knobs for a Philo 42-345. Thanks! Brian
#2

Welcome to the Phorum!!
Check RadioDaze for decals.  The knobs on that one are a little unusual so try the folks that Ron has listed as resources for knobs.  David, Julie, Kelton and Mike supply original knobs.  I've bought from all but Kelton in the past.  You may have to try them all as they don't have every knob for every radio. The grill cloth looks a bit like the whiskey rayon that Kenneth Richmonds sells but its a little hard to see in the 42-345 photos I was looking at.  
#3

no no no whiskey rayon!


It is like carpeting and I used one off ebay that matched pretty good.


Attached Files Image(s)
   

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#4

Hi. I know this is an old thread, but I have the same radio and looking for grill cloth. Can you tell me where you found that one or a name for it?
#5

Welcome MamaJennie! Nichael Katz has a site called Radio Grill Cloth. Good source for fabric.
https://www.radiogrillecloth.com/
Try Radio Daze for knob decals.
https://www.radiodaze.com/decals-48/
Hope this helps. Gary

"Don't pity the dead, pity the living, above all, those living without love."
Professor Albus Dumbledore
Gary - Westland Michigan
#6

I’ve recently used both Michael Katz’s fabric and Radio Daze’s decals for a radio of my own. I can attest that you’ll be most satisfied.

My only advice, when ordering the decals, is to make sure that your decal kit includes the “Philco” decal. The kit I ordered had all other decals but not this one, so I needed to order a separate Philco decal. I noticed that other decal kits do include the branding, so just be mindful!

Joseph

Philco 46-480
Philco 49-906
#7

Another learning experience I had. You will benefit tremendously from purchasing decal softener and setting solutions such as Micro-Sol and Micro-Set, AK Interactive Decal Setting Solution, or the like. This will really help to conform the new decals to the surface of your radio and will eliminate the laminated look of your decals.

Joseph

Philco 46-480
Philco 49-906
#8

Thank you. Where would I find those products?
#9

Right now Mike is probably the only good source of Philco-specific cloth, as well as others (I bought both Philco and RCA from him).

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#10

Hello MamaJennie. Just click on the highlighted web addresses in post number 5. Gary

"Don't pity the dead, pity the living, above all, those living without love."
Professor Albus Dumbledore
Gary - Westland Michigan




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
An attempt to remove the Field Coil from a G speaker
So, Q1. Does anyone know where to get the spider. Q2. If there is no such place, what material is best? I doubt tin is...morzh — 09:43 PM
An attempt to remove the Field Coil from a G speaker
Arran The oxidation seems to go deep, a few layers. The break starts right there, but then it will occur on every la...morzh — 07:35 PM
An attempt to remove the Field Coil from a G speaker
Mike, This is just a thought, the are on the coil where the verdigris (green oxidation is) I wonder if that is where ...Arran — 06:32 PM
An attempt to remove the Field Coil from a G speaker
Mike; I've made a one or two spiders by using some card stock, and a razor blade, it took more then one try but they ...Arran — 05:48 PM
Philco 91 Restore Code ??
I wondered about that. Wish there was some place local to get this stuff.dconant — 04:20 PM
Philco 89 indicator light.
Bending the lamp bracket (moving the lamp, that is) can possibly change the shape of the pointer a bit, but not its loca...morzh — 04:01 PM
Philco 91 Restore Code ??
Because the usable power rating of it then is (3,200/20,000)*25W= 4W. Maybe a tad more due to the mass, but not much. Yo...morzh — 03:59 PM
Philco 89 indicator light.
Thank you Dan, that was the trick. I kept trying to rebend the lamp bracket but that wasn't doing anything to help.Jim Dutridge — 02:18 PM
Philco 91 Restore Code ??
20K 25 watt. I thought it was a 20 watt at first.dconant — 01:37 PM
My Philco 37-116 Restore
Nah, too much and not that important.morzh — 01:33 PM

[-]
Who's Online
There are currently 5583 online users. [Complete List]
» 1 Member(s) | 5582 Guest(s)
Avatar

>