Posts: 15,502
Threads: 543
Joined: Oct 2011
City: Jackson, NJ
I think it is 1" and that's what I built.
Now that it is built I only need lugs and eyelets.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
(This post was last modified: 02-16-2015, 10:17 AM by morzh.)
Posts: 15,502
Threads: 543
Joined: Oct 2011
City: Jackson, NJ
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
(This post was last modified: 02-16-2015, 11:05 PM by morzh.)
Posts: 3,129
Threads: 56
Joined: Apr 2011
City: Lexington, KY
Beautiful job
See, you didn't need no stinkin' eyelets or lugs
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 15,502
Threads: 543
Joined: Oct 2011
City: Jackson, NJ
Yep. That just complicates it. I saw some radios, forgot which, could be Century or Halson, where the coils were done exactly this way. Plus the AK I just did has that where they use drums with resistors and caps mounted on them (that's how they mount components, instead of the flat phenolic board) in the same way too.
So I thought to myself, if it is good for them, why not for me....I mean, for Kirk
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 2,572
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
so your being kind of skimpy with kirks parts
I would not stand for that kirk demand oem parts
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
Looks great Mike!
You could have used brown for the bobbin but I won't be picky
I actually got to your big fat cabinet yesterday in the garage. I forgot what it looked like
I think I will do the smaller one first since it is the lesser of 2 evils. Won't get to them for about a month but I will, promise!
Kirk
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
They are original Mike parts, with this chassis, I will not complain... Much
Kirk
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 15,502
Threads: 543
Joined: Oct 2011
City: Jackson, NJ
I don't use no aftermarket parts, solely original "Walrus Dick and Co", all hand-made.
Kirk, no rush on those two, I hadn't even got to their chassis yet, plus you need good weather to laquer.
As for brown.....you did not want me to use toilet paper roll, did you? I used fishpaper, and this one, from AES, is blue. It is good though, very dense, I like it.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
(This post was last modified: 02-17-2015, 11:57 AM by morzh.)
Posts: 15,502
Threads: 543
Joined: Oct 2011
City: Jackson, NJ
Q: who uses what for bobbin protection, and what is the process?
If parafin wax is used, is candle parafin wax good? Or is it differend? how do you do it, just melt'n'dip, or...?
If laquer is used, what type? It should be benign on wire enamel and be a good moisture barrier.
The material is leatheroid (fishpaper), and it being hygroscopic, the coil needs to be protected.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 4,654
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
I figured that one would need a tube that is fairly thick and rigid, is fish paper rolled into a cylinder rigid enough? As for lugs I think I would have pulled them off of a destroyed coil or used one of those terminals that you attach to a chassis with a screw for a ground, but whatever works. I think that you could probably just dip the coil in varnish, but any sort of spray lacquer will do, or even the evil poly, or clear Krylon. Paraffin wax doesn't really work that well, it melts too easily, and finding a wax that works is tricky, bee's wax might be the closest.
Regards
Arran
Posts: 15,502
Threads: 543
Joined: Oct 2011
City: Jackson, NJ
Arran
Above I have already gave the pic of the coil, I did without lugs. No need.
The fish paper I have is rigid as it is (as a product it is designed to be rigid and resist mechanical stress, it even has some mica in it just for that) but then I did two-ply glued together, which I then rolled and glued, and then when it dried, put it on a cylinder (somehow it fitted exactly to an aluminum cap I had which was 1"), heated it up a bit with a heat gun and left to cool, then took it off - it is a practically ideal cylinder now. Very rigid. In fact way more rigid than the original coil. Plus I think non-palatable to rodents as it has mica. (I think the wax is the substance the rodents were after, they love eating candles).
I will probably get a spray lacquer as you suggested. I do not know if it is safe for enamel but as it dries very fast it probably won't damage it.
Actually there was another though - I secured the winding with fabric glue (dries clear) and I though, why not using it for this? I could just spread it thinly all over, inside and outside, and it will waterproof it. Won't it? (I mean, moisture-proof )
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
(This post was last modified: 02-18-2015, 10:42 AM by morzh.)
Posts: 15,502
Threads: 543
Joined: Oct 2011
City: Jackson, NJ
I just realized - why not use a conformal coating.
I think either acrylic or silicone. They specifically protect electronics from elements. Used that long time ago, coated myself from spray bottle, but I think I will order one with a brush.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
(02-18-2015, 02:48 PM)morzh Wrote: ...or silicone
NOOOOO!!!!!
Do not use silicone unless it is the type that is safe for copper. Otherwise your hard work will be eaten by the silicone.
--
Ron Ramirez
Ferdinand IN
Posts: 15,502
Threads: 543
Joined: Oct 2011
City: Jackson, NJ
Ron
I am inclined to acrylic, seems to be the easiest and the least smelly one, but when I said Silicone, I meant this one
http://www.mgchemicals.com/products/prot...ting-422b/
It is a coating to be directly applied to PCBs which use copper traces, though most times coated with tin/tin-led, and soldermask, but this one does not say anything about being corrosive to copper that very well may be exposed in some places.
Do you have bad experience with Silicone CC or with silicone products in general corroding copper?
(The one I used in the past was, I think, Acrylic, so I never used Silicone)
PS. Found this.
http://forums.mikeholt.com/showthread.php?t=136565
This explains some of it.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
(This post was last modified: 02-18-2015, 03:24 PM by morzh.)
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Yes, I do. I used silicone as a potting material for a few metal can capacitors...until the stuff ate some new capacitors, ruining them.
A friend of mine who works with marine electronics once told me that the company he works for was experiencing problems with some sort of outdoor control box.
He opened the box to find all of the copper had been eaten away - the box had been filled with silicone in an effort to keep out the elements.
Needless to say, now if I need to pot something, I use hot glue instead.
--
Ron Ramirez
Ferdinand IN
Users browsing this thread: 2 Guest(s)
|
Recent Posts
|
Bakelite crack repair - what is best epoxy?
|
Starting on a Philco 48-1401 Boomerang radio/phonograph. It has one crack on the left side running from the speaker ope...de371 — 07:17 PM |
Philco 89B code 123 newbie
|
Progress continues, finished blocks 9 and 26. I wonder for caps 23 and 24—can I get away with 100pf instead of 110pf?
...Kurt P — 03:43 PM |
Looking for place to donate unique Philco Philco J-1930 Prototype
|
Welcome to the Phorum, jeibner. Several of our members have connections with radio-related museums. I'm sure others wi...GarySP — 03:41 PM |
Looking for place to donate unique Philco Philco J-1930 Prototype
|
I'm looking for a museum or other permanent home where I can donate a unique Philco prototype of a very top of the line ...jeibner — 03:15 PM |
Test bench almost done...
|
Sweet! Yes, that's a lot of planning and work but will pay off! I built mine about 10 years ago using a radio book from ...TV MAN — 11:39 AM |
1950 Emerson TV resurrection attempt
|
Been awhile since I've even been in the radio room. Work work work, kids graduating, going into college, and the list go...TV MAN — 10:35 AM |
Philco 269 - 444 FIVE VALVE VERSION?
|
> So, given that this is a major refurb I don't have the time to spend on this, so happy to pass it on to someone who...Radioroslyn — 09:08 AM |
Philco 269 - 444 FIVE VALVE VERSION?
|
Thanks for this
Hi Chas,
Fix it, don't bin it! Don't sell your skills short. One step at a time and like the Home D...ChasL0001 — 01:48 AM |
Philco 84 antenna connection
|
Have a Philco 80 my long wire is app 30 feet, for a ground in my work shop have a ground rod that is used only for radio...David — 07:47 PM |
Philco 46-480 Cabinet Restoration
|
Thank you, Gary! I appreciate it.jrblasde — 07:24 PM |
Who's Online
|
There are currently 2824 online users. [Complete List] » 2 Member(s) | 2822 Guest(s)
|
|
|
|