Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
I'm a happy camper tonight.
Acquired a complete 41-300 console from the Olney, Illinois auction today. The chassis is missing an IF can shield, and the speaker is badly torn.
SO...this cabinet will be the new home for the working 41-300/315 chassis and speaker I recently acquired - thank you again, Terry; as Maynard G. Krebs used to say, you're a great American and a heck of a good sport.
The cabinet will need a bit of work, but at least I can go ahead and use the radio. 
Will post a photo in the near future. You know the drill...gotta finish this roll of film.
--
Ron Ramirez
Ferdinand IN
Posts: 16
Threads: 1
Joined: Oct 2005
Wow! I picked up a 41 300 today at an antique store in Laporte Indiana
today. There is a small chip in the veneer on the folding lid but it plays
great. I hope to find out more about this radio. After I got it home I
realized it was much larger than I had thought. It's very cool.
oops,I just realized its a new day. I got it yesterday.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Coincidence? Or maybe yesterday was the day for a couple 41-300 sets to pop out of the woodwork? 
--
Ron Ramirez
Ferdinand IN
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Here's an open and closed view of the 41-300:
[Image: http://www.philcoradio.com/images/phorum/41300b.jpg]
[Image: http://www.philcoradio.com/images/phorum/41300a.jpg]
I now have the chassis I acquired from Terry in this cabinet, and it sounds GREAT.
--
Ron Ramirez
Ferdinand IN
Posts: 16
Threads: 1
Joined: Oct 2005
Trying to check tubes today in my 41-300. I can't see the numbers on the tubes. Is there a diagram
that shows what tube is what?
Haven't been to this site for awhile. Spending time on the ham bands.
Thanks
Bill
Posts: 909
Threads: 117
Joined: Jun 2007
Congrats on your new finds guys!! Billvet, you may find a schematic for tube layout at: http://www.nostalgiaair.org in the Philco pages of JF Riders. Enjoy your Philcos!!! Randal
Posts: 909
Threads: 117
Joined: Jun 2007
Ron, since many of the newbies here dont know who "maynard g krebs" was, thought I better offer abit more info on Gilligan.
http://en.wikipedia.org/wiki/Maynard_G._Krebs
If I remember correctly, the "professor" on Gilligans Island was a fairly good radio tech? Or was it the Skipper? :
Posts: 717
Threads: 30
Joined: Feb 2008
City: Grand Rapids, MI
Mostly it was the professor, altho the Skipper had buried in his subconscious instructions for constructing a radio transmitter, and such was the plot for one of the 1st. season b&w episodes, to get him to drop off to sleep so he could remember how and prevent Gilligan from fouling things up. There was a large Hallicrafters receiver on the show at one point, perhaps a S-40.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
billvet6 Wrote:Trying to check tubes today in my 41-300. I can't see the numbers on the tubes. Is there a diagram
that shows what tube is what?
Haven't been to this site for awhile. Spending time on the ham bands.
Thanks
Bill
There is a tube layout diagram in the back of my Philco Radio book.
--
Ron Ramirez
Ferdinand IN
Posts: 337
Threads: 15
Joined: Nov 2005
City: Ortonville, MI
I haven't my '41 service notes handy, but is this the '41 counterpart of the 42-400? I've had one of those since 1948. I bought it from the original lowner, and it's languished in my bedroom for all that time. The first radio I ever heard FM on.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Hi Doug
Yes. Only the 41-300 does not have the old FM band; instead, it has AM and three SW bands.
--
Ron Ramirez
Ferdinand IN
Posts: 337
Threads: 15
Joined: Nov 2005
City: Ortonville, MI
Thanks. If I'm not mistooken, Philco didn't have FM in '41.
I've always sort of chuckled about it, but RCA was so committed to TV through the thirties, Sarnoff completely shut out FM before the war, and there were no RCA FM receivers prewar.
Posts: 26
Threads: 3
Joined: Aug 2008
Saw this on Craig's List... it's in Englewood, Ohio (Just to the North of Dayton).
http://dayton.craigslist.org/clt/986078397.html
Posts: 225
Threads: 14
Joined: Oct 2005
City: Grand Blanc, Michigan
I had tried several times on ebay to purchase one of the these radios but seem to always end up as a dollar short on the bids, so I finally just gave up. I always thought they would be a decent sounding and a decent performing radio if restored.
Posts: 16
Threads: 1
Joined: Oct 2005
Ron Ramirez Wrote:billvet6 Wrote:Trying to check tubes today in my 41-300. I can't see the numbers on the tubes. Is there a diagram
that shows what tube is what?
Haven't been to this site for awhile. Spending time on the ham bands.
Thanks
Bill
There is a tube layout diagram in the back of my Philco Radio book.
Thanks. Once again I am glad I have the book!
Bill ab9qu
Users browsing this thread: 2 Guest(s)
|
|
Recent Posts
|
|
Value of capacitor
|
| If this helps you sort it out just remember 10,000 mmfd or pf = .01 mfd. So 5,000mmfd = .005 mfd.Radioroslyn — 04:23 PM |
|
Value of capacitor
|
| OP here- the parts list calls for an .005 1000 volt mica. It currently has an .005 1000 volt electrolytic that is at lea...bridkarl — 02:09 PM |
|
Value of capacitor
|
| Maybe it's one of those paper caps that is wrapped in a mica-lookiing case.RodB — 01:51 PM |
|
Value of capacitor
|
| I also was wondering what the post about using polarized caps had to do with the subject?
The cap is 5nF, does not exis...morzh — 10:22 AM |
|
Value of capacitor
|
| The OP stated that there is an electrolytic in the circuit in place of the coupling cap and wondered what effect it has....RodB — 09:53 AM |
|
Value of capacitor
|
|
According to AI... ...assuming the electrolytic that's in it now is polarized...
What does your response have to ...DaleHCook — 08:17 AM |
|
Philco 50-925 antenna connections
|
| Most loop antenna setups are either one continuous loop with two connections or 2 loops with 4 connections. The latter c...RodB — 02:16 PM |
|
Value of capacitor
|
| Not trying to answer for the OP, just commenting on the thread.
According to AI... ...assuming the electrolytic that'...HowardWoodard — 02:09 PM |
|
Philco 50-925 antenna connections
|
| Hello Keith! I've updated your thread with the proper model number. Take care, - GaryGarySP — 01:10 PM |
|
Value of capacitor
|
| Why are you having to replace it? Does it measure out of tolerance? Is it mechanically damaged?DaleHCook — 07:50 AM |
|
Who's Online
|
| There are currently no members online. |
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
