philco portabble ac/dc 42-842
Posts: 2,573
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
mike I`m not like kirk
I buy one or two items here and their
kirk buys other peoples hoards to add to his hoard 
all I know is he`s going to be very very busy this summer 
sam
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 2,573
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
terry
happy to say both 41-843 and a 42-842 are now playing great
the 842 had bad solder joint ? at 1el3 tube. wiggled would hear some static play then went out again. reflowed solder
it worked playing fine now
843 recapped played on start up
so on to the 3rd one 41-81 yes it`s a portable too woohoo 
BIG THANKS TO TERRY 
sam
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 7,300
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
Great!!! A buddy gave me a 40-81. It's a battery only set. The battery cable is still in good shape and I was thinking of using that little p/s I built for the Crosley Tridyn. It has an adjustable regulator for the filament supply. Will do 1.2v to about 5v under load. Did make a replacement leather handle original was shot.
Terry
Posts: 7,300
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
Hey Sam
You want to do a playday on Sunday???
Don't know what Mike is up to.
Terry
Posts: 2,573
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
Terry
can do Sunday what time shoot me your address
How about it mike you want to come along ?
Not Kirk though he don't share only hoards them 
Any one else ? Stevejb or bob ?
Sam
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 7,300
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
Oh so yous guys really want to come over to the city dump! It actually changed quite a bit since you where here last. The whole upstairs has been rebuilt with new walls, carpet, marble counters, took out the wall between the kitchen/dining room ect,ect,ect. But basement and shed are a disaster!!! All of the extra stuff ended up in those to places in a hurry during the remodeling.The workmen kanda stacked a lot of the downstairs. At that time I wasn't doing so well and didn't here the energy to do it myself. Maybe I can pawn off some stuff to yous guys.
If a few of you want come over that's fine but don't necessarily want the whole Phorum over.
Terry
Posts: 16,495
Threads: 573
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Sun? Sure. Where, what time?
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 2,573
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
Umm terry
I was Gona pawn some consoles off to you 
An mike 
Sam
Ps mike you will have to bring your own moldy beer won't
Find that in pa
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 7,300
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
If there's any odds or ends I can help yous out with bring list. Got lots of parts.
Terry
Posts: 2,573
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
Terry, mike
either of you need consoles 8)
Come on I have to move them from work
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
Philco model 40-100
|
| Marion;
By "newer style" carbon resistors do you mean the molded type with coloured bands rather then the BE...Arran — 01:00 AM |
|
Philco 46-480 Electronic Restoration
|
| hello jrblasde ,
your radio sounds great well done !!
I bought like 20 years ago a Philco 610b that someone had painte...radiorich — 11:50 PM |
|
Philco model 40-100
|
| Arran,
I just can't tell if the volume control has been replaced. The control has a brass shaft with one half flat for ...mhamby — 11:08 PM |
|
Philco model 40-100
|
| You may be able to make the part out of wood. The particular vendor has a habit of disassembling radios and selling the...MrFixr55 — 10:09 PM |
|
Philco 46-480 Electronic Restoration
|
| Used to get to Bentonville when I worked for a Walmart vendor....nice and sleepy back then. PaulPaul Philco322 — 09:49 PM |
|
Philco Model 249 made in England
|
| Did Garrard produce stand-alone turntables? The reason I ask is, when I was a kid my grandfather gave me a KLH Model 20 ...jrblasde — 09:37 PM |
|
Philco Model 249 made in England
|
| Neat looking set, definitely Euro- style. I am guessing that this is solidstate due to the vent holes (or lack thereof,...MrFixr55 — 09:32 PM |
|
Philco 46-480 Electronic Restoration
|
| Haha, thank you sir! I’ve been eyeballing a 47-1230 console for sale over north of Bentonville, Arkansas for a while. Pr...jrblasde — 09:18 PM |
|
Philco 46-480 Electronic Restoration
|
| @ Joseph, get off the porch and run with the dogs. You fixed one, grab another. @ Morzh, I think that we are the same ...MrFixr55 — 08:59 PM |
|
Philco Model 249 made in England
|
| Wow! Now that is something! I’ve never seen a Philco like that, but it’s pretty mid-century.jrblasde — 06:40 PM |
|
Who's Online
|
| There are currently no members online. |
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
