Posts: 4,109
Threads: 310
Joined: Nov 2013
City: Kings Park NY
I made about $80.00, spent $20.00, It was ok but it was Easter so turnout was a little weak. Next one is right before K-Town so I dont think I am gonna go. The old guys are CHEAP!
It is at a Train station in Seaford every first sunday of the month.
Kirk
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
There is nothing wrong with the 44/144 sets, although many overlook them because they are "only" a six tube set.
I believe Philco came up with a winner with these models. A good one will really pull in the stations, especially SW.
Posts: 4,707
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
I think that I would sooner keep a model 44 then a model 89, the model 89s are much more common, and they have a crappy autodyne oscillator circuit, and only have two bands at most.
Regards
Arran
Posts: 3,135
Threads: 54
Joined: Apr 2011
City: Lexington, KY
Another vote on the 44 over an 89.....
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 4,109
Threads: 310
Joined: Nov 2013
City: Kings Park NY
If it was in better condition I would.
Its Rons problem now, hehe
Kirk
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Whaddya mean, my problem now???
Actually, if the picture in the first post of this thread is any indication, that cabinet is repairable. The chassis would not be a problem - and I have a spare chassis.
So, Kirk - yes, I'll take it. Thanks! (I think.)
--
Ron Ramirez
Ferdinand IN
Posts: 4,109
Threads: 310
Joined: Nov 2013
City: Kings Park NY
Repairable yes but too much work for me. I dont love it so I would not want to put the time into restoring it.
Hence "your problem now"
Kirk
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
Come on Kirk, what do you mean you don't want to put the time in to restore it? Look at it this way, you won't have to buy more radios! This will keep you busy. Sorry brain fart, no, you will keep buying!
A friend in need is a pest! Bill Slee ca 1970.
Posts: 4,109
Threads: 310
Joined: Nov 2013
City: Kings Park NY
nope, no buying unless is is something special. A Halson and such.
I passed her on to Ron so it has a good home.
kirk
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Yes, the 44B, Debbie, and I made it home safely...I will give the 44B a good home...many thanks to Kirk, I really appreciate it.
--
Ron Ramirez
Ferdinand IN
Users browsing this thread: 2 Guest(s)
|
Recent Posts
|
New Philco Repair Bench
|
Apparently there is a new Philco Repair Bench found at https://philcoradio.com/repairbench/ When I try to go to order a ...dconant — 12:00 PM |
Philco 60 Squealing
|
Well, a wave trap is a trimmer in series with the coil so at the resonant frequency it provides a short to ground. This ...RodB — 10:07 AM |
Philco 60 Squealing
|
Rod, My radio is run 7. The wave trap is on that schematic as shown in the picture.
dconant — 09:21 AM |
American Bosch Model 802 auto radio
|
Hi Arran ,
Thanks for your help with this radio.And especial thanks for letting me know to look it up under United Ame...Antipodal — 04:32 AM |
Philco 60 Squealing
|
Usually a wave trap is for keeping IF signals from entering the antenna and from leaving the antenna. You feed an IF sig...RodB — 09:30 PM |
Philco 60 Squealing
|
I just peaked it for the best signal at 600.
NULL it for IF frequency, originally it would have been null for 500kh...Chas — 08:05 PM |
Philco 60 Squealing
|
Wavetrap no longer matters.morzh — 05:19 PM |
Philco 60 Squealing
|
Rod, I had checked out your suggestions but did not help. I did solder the ground rivets to the chassis as Chas suggeste...dconant — 04:52 PM |
37-690 Bass Choke Replacement
|
Yeah, I know, Mouser and Digikey don't have "big iron" components. For some reason Philco was messing with the...Radiodial — 04:25 PM |
37-690 Bass Choke Replacement
|
Yes, I just had to deal with that while repairing the 37-604 Philco. Exactly that value choke was gone. And the current ...morzh — 03:52 PM |
Who's Online
|
There are currently 4417 online users. [Complete List] » 1 Member(s) | 4416 Guest(s)
|
|
|
|