Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Am I color blind?
#1

I'd post a schematic pertaining to my question, but I'm sure someone will have an answer without it. Besides, it really wouldn't help anyway.

Philco 40-180. Capacitors 1A, 6, and 22 are all listed as 250 picofarad Mica caps. They are all 3 dot, but the color codes on all three are green, orange, and green. Shouldn't they all be orange, green, brown? They've never been replaced, and no changes were indicated on any of the schematics.

I am missing something here, or should I go see the eye doctor?
#2

(05-23-2015, 08:45 PM)Patrick Wrote:  I'd post a schematic pertaining to my question, but I'm sure someone will have an answer without it. Besides, it really wouldn't help anyway.

Philco 40-180. Capacitors 1A, 6, and 22 are all listed as 250 picofarad Mica caps. They are all 3 dot, but the color codes on all three are green, orange, and green. Shouldn't they all be orange, green, brown? They've never been replaced, and no changes were indicated on any of the schematics.

I am missing something here, or should I go see the eye doctor?

I think that Philco has the color codes in no particular order like resistors.  See here:

http://www.philcorepairbench.com/micacap.htm

Crist
#3

(05-23-2015, 08:45 PM)Patrick Wrote:  I'd post a schematic pertaining to my question, but I'm sure someone will have an answer without it. Besides, it really wouldn't help anyway.

Philco 40-180. Capacitors 1A, 6, and 22 are all listed as 250 picofarad Mica caps. They are all 3 dot, but the color codes on all three are green, orange, and green. Shouldn't they all be orange, green, brown? They've never been replaced, and no changes were indicated on any of the schematics.

I am missing something here, or should I go see the eye doctor?

Crist is correct. If it had been the RMA color code, it would have been red-green-brown.  Joe

Joe

Matthew 16:26 "For what does it profit a man if he gain the whole world, yet lose his own soul?"
#4

I meant to say red, green, brown, not orange, green, brown. My finger slipped.

But thanks, guys. I guess it proves that drugs WERE prevalent in the 30's and 40's. It also means my eyes are O.K. Old, but O.K.. Lots of information on that site that I didn't know existed. Thanks.

The part number, 61-0033 is not listed on that chart, but I see what you mean.

Pat




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM
Shadow Meter Bulb
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM
Hickok AC51 tube tester
Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM
Model 28L
Hello, I'm restoring a Philco 28L and the output transformer is open. Part number of the transformer is 32-7020. Can...HORSTE — 10:32 AM
Philco 42-1008 conversion kit
I read about a kit to convert the variable speed changer in the Philco 42-1008 into a single speed unit.  That would rem...alangard — 09:30 PM
HiFi (Chifi) tube amp build - but my own design.
Tim Well...a chassis is metal. Magnetic or not, it does not matter. A transformer has some hum to it. It is natural. Th...morzh — 08:40 PM
Hickok AC51 tube tester
I thought the 83 tube was bad because it looked white but it tests strong. Blue gassy though. I checked the fuse, it was...martinj — 08:37 PM
Shadow Meter Bulb
Ross I am not sure what current limiting effect the incandescent provides. They are two different parts of the sch...morzh — 08:31 PM

[-]
Who's Online
There are currently 5492 online users. [Complete List]
» 1 Member(s) | 5491 Guest(s)
Avatar

>