06-26-2015, 07:31 AM
Will the ARBE-III http://www.radiolaguy.com/RadioPowerSupply.htm work for my 37-33? I can't be certain based on the information I have read so far, so I am taking the lazy way out and just asking.
Power supply for 37-33
06-26-2015, 07:31 AM
Will the ARBE-III http://www.radiolaguy.com/RadioPowerSupply.htm work for my 37-33? I can't be certain based on the information I have read so far, so I am taking the lazy way out and just asking.
06-26-2015, 11:03 AM
kl
yes arblll should work sam Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift mafiamen2
06-26-2015, 12:19 PM
06-26-2015, 02:01 PM
Welcome to the Phorum!!
![]()
06-29-2015, 05:57 AM
06-29-2015, 06:24 AM
Not sure if it will. The 37-33 requires two bias voltages -3 and -9v. It's simple enough to wire up a battery or two for these voltages. Then all you need is +135v, 90v, and 2v for the filaments. Be sure to throttle back the filament voltage if you have been using the p/s on a set with 01A's.
Terry ps After looking at the link it should work fine!!!
06-29-2015, 06:31 AM
(06-29-2015, 06:24 AM)Radioroslyn Wrote: Not sure if it will. The 37-33 requires two bias voltages -3 and -9v. It's simple enough to wire up a battery or two for these voltages. Then all you need is +135v, 90v, and 2v for the filaments. Be sure to throttle back the filament voltage if you have been using the p/s on a set with 01A's.Thanks! I had already ordered it. I know I could rig it but I am getting lazy in my old age.
06-29-2015, 02:44 PM
It's a good playing set . I've got the table model picked it up 30yrs ago. Was in ruff shape and was missing the spkr. Used an 8"pm spkr w/a p/p output transformer.
Terry
06-29-2015, 09:32 PM
(06-29-2015, 02:44 PM)Radioroslyn Wrote: It's a good playing set . I've got the table model picked it up 30yrs ago. Was in ruff shape and was missing the spkr. Used an 8"pm spkr w/a p/p output transformer.Terry, I had both the cathedral and floor models of the 37-33 and decided to part with the cathedral as the cabinet is the same as several other models I have on display. BUT it sold for less than $30 on ebay and it was in excellent condition. KLB
« Next Oldest | Next Newest »
Users browsing this thread: 1 Guest(s) |
![]() |
![]() |