Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Using Gojo Creme on veneer
#1

I watched a guy on YT do this to his rather nasty looking Philco, and I was amazed with the results! The Gojo Creme is about $2.00 for a good sized jar at your local auto parts store. It cleans the veneer right up! I highly recommend it. Just get a soft cloth and a small helping of the stuff and gently rub it with the grain on your Philco's veneer.


Attached Files Image(s)
   

Slave to an RCA Victor CTC-25
#2

which auto parts store?
#3

Non pumice right?
Works great!

Kirk

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#4

I got it at O'Reilly. They have pumice, but I did not want to use that in case it would scratch.

Slave to an RCA Victor CTC-25
#5

I just did this with my 40-180. I don't have a before picture but this is the after. I love it and would recommend it to anybody. Works GREAT!


Attached Files Image(s)
   
#6

"Washing" a cabinet with go-jo is a great way to remove the years of attic dirt. It gives you a better idea just what condition your cabinet is in and whether or not you want to refinish. 

I have had many cabinets that literally "came alive" after being cleaned with go-jo. 

NEVER use the go-jo with pumice on a cabinet!!
#7

I also use the go-jo first on any cabinet I get that looks promising, no wood damage that needs repair etc.. Have had good luck with it.
#8

I"ve used it on grimey chasses as well.
#9

Found some at a NAPA store.
#10

I found it at Wallmart in the automotive department. [[hand cleaner]

   Living in Calgary Alberta
#11

Is GOOP the same stuff? Looks the same and smells the same. Its gojos competitor, I found Goop at Walmart, they didn't have gojo. I use it for my hands. Haven't tried yet on wood cabinets.
#12

Yes  goop is same thing as gojo

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#13

I'm assuming that these success stories are on cabinets that were pretty much perfect and just had years of grime build up.

My first to radios were a disaster and Gojo would have done nothing.
#14

(07-12-2015, 11:42 PM)Edisla Wrote:  I'm assuming that these success stories are on cabinets that were pretty much perfect and just had years of grime build up.

My first to radios were a disaster and Gojo would have done nothing.

Yes its just for dirt, wax build up? , grime , grudge, grease, grit, finger prints, oil, latex paint, crayons, ink, ant piss, dust, lite water marks, bullet holes, cigar burns, cigarette burns, dryed whiskey, spilt soda, beer, tea, coffee, also repels spiders , roaches, piss ants, silverfish , etc. Icon_wave Icon_wave Icon_wave Icon_wave Just messen around Edisla Icon_crazy Icon_crazy Icon_crazy Icon_crazy Icon_crazy Icon_crazy Icon_crazy
#15

I use Non pumice Goop and 0000 steel wool.  I just cleaned up a 46-1203 last night and it came out looking great!  In fact I think I'll change my avatar from the refinished 48-1256 to the original finish 46-1203!




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
American Bosch Model 802 auto radio
Hello again;   I found a model 838 car radio on Nostalgia Air under United American Bosch, http://www.nostalgiaair.org/...Arran — 09:32 PM
New Philco Repair Bench
Morzh is correct. The repair bench on our website is an archived image of chuck’s original site. He no longer provides s...klondike98 — 05:32 PM
Made mistake & did not label connection
Excellent information. It is all starting to come together now and your explanation really helped since I noticed that ...georgetownjohn — 04:39 PM
Made mistake & did not label connection
Hi John, I don't have this radio, but I can supply some info: Based on your pic, pins 7,8 and 1 are used together, go...MrFixr55 — 02:02 PM
New Philco Repair Bench
As far as I know, the Repairbench does not work, and has not been working in a while. Chuck (we had that campaign looki...morzh — 01:33 PM
Radio city products 664 schematic request
Need a schematic or manual for the 664. The 663 may be similar.daveone23 — 12:38 PM
New Philco Repair Bench
Thanks Gary.dconant — 12:16 PM
New Philco Repair Bench
I tried accessing the site through our library and got the same response. It's reported to our tech gurus. GaryGarySP — 11:50 AM
New Philco Repair Bench
I am sure this is the archive, and not the Chuck's site.morzh — 09:50 PM
Made mistake & did not label connection
It's not like we are good friends with that wire and can tell it from other ptetty identical looking wires. Why'n't you...morzh — 09:49 PM

[-]
Who's Online
There are currently no members online.

>