Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

570 Grandfather
#1

I am working on a 570 that I recieved for free. The cabinet was is pretty bad shape with the sides pretty much delaminated. I have reglued and looks pretty good considering. Due to a lot of scratches, and how dried out the finish was, I scraped the entire cabinet. To even out the appearance I wiped on some red mahogany stain.

Questions:

1. The top finial is broken with part of the very top missing. I am planning on turning a replacement but am not sure of the overall length and what the top part looks like. Does anyone have a close up pic or sketch that would assist me? The photo I have from the net is not clear enough.

2. I see a lot of "restored" pics of radios where laquer is sprayed which results in the shiny look (original I believe). Would I be in grave error if I used several coats of a wipe on poly that I am more familiar with. I prefer less shine.

By the way I now have the radio working fine after recapping and winding a coil.

Thanks.
#2

Poly is a no-no if you ever want to sell it and brush on lacquer is as easy as brush on poly and if you want you can wet sand the lacquer to get a nice smooth finish. I don't think I would use poly since I have never found using either spray or brush on lacquer a problem.
#3

Stude is right on the money, marv. Stains will never give the overall uniform color that you get from toning (tinted) lacquer. And for your final coats of clear, you can obtain semi-gloss and satin lacquer as well as the glossy type.

--
Ron Ramirez
Ferdinand IN
#4

Hello,

I have a 1931 Philco 570 Grandfather clock, but it is missing the radio, the knobs as well as the backlite plate. What would you consider charging to make a clay or plaster mold of your backlite plate on your clock? I'm running out of options to have a reproduction made and finding an existing one is seeming impossible. I'd really like to get something made to at least place in there and I thought about making a mold copy from an existing one. Thank you for any consideration. Layne Chartrand of Troy, Missouri. 314-777-0587.
#5

Hi and welcome, Blackflagger.

Have you tried Old-Time Replications? I believe they reproduce the knobs as well as the escutcheon for your radio.

http://www.antiqueradioknobs.com/

I believe there are other sources for reproduction escutcheons? I know there are other sources for the knobs. Look here:

http://www.philcoradio.com/resourceb.htm

--
Ron Ramirez
Ferdinand IN
#6

Thank you, Ron! I've not tried for the escutcheon. I did have luck with reproduction rosette knobs at (6.25 each). I will contact them on that. I sure hope they have it; that would be absolutely awsome!!! Thank you so much for the help! Layne!!! This is an EXCELLENT forum!




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 91 Speaker Replacement
The spider is glued on the cone and so is the voice coil. I think you can use a cotton swab dipped in acetone and carefu...RodB — 02:42 PM
Restoring Philco 37-604C
Yes I saw that. If I knew, I'd probably try to arrange for getting it myself. But I have just got one. Which does not m...morzh — 01:44 PM
Philco 38-2 Automatic Tuning
When you push the lever, you are supposed to rotate the disk to the desired station. Then the magnetic tuning will acqu...morzh — 01:42 PM
Philco 38-2 Automatic Tuning
I figure out the muting from another picture that helped. Now I need to know how the automatic tuning works. When I push...dconant — 12:11 PM
Philco 91 Speaker Replacement
How would I go about removing the spider from the cone?dconant — 12:04 PM
Philco 38-2 Automatic Tuning
Hello, I am having trouble getting my automatic tuning to stay unmuted. If I play with the tuning handle I can get it to...dconant — 10:51 AM
Does anyone make photofinish replacements?
Here’s the link to the DIY photofinish section of our site: klondike98 — 09:46 AM
Delco car radio Peko vibrator converstion issues
Hi Richard, Thx for posting the schematic.  As I remember as a kid, these were great performers for the time, likely...MrFixr55 — 08:56 AM
Delco car radio Peko vibrator converstion issues
hello mr Fixr, The Electro  Powersupply that I am powering the radio with has a huge choke plus a 10,000ufd electrolyti...radiorich — 10:58 PM
Delco car radio Peko vibrator converstion issues
How about putting a choke in the power supply? The big cap was likely an attempt to stabilize the DC. Kids who cre...MrFixr55 — 09:19 PM

[-]
Who's Online
There are currently no members online.

>