Posts: 1,824
Threads: 114
Joined: Jul 2014
City: Sneedville, TN
I found this 37-61 on ePay. I bought it for $39.99, and, since it was nearby to me in Canton, Massachusetts, I was able to pick it up and save both shipping cost and damage to the radio.The speaker cone is toast. I am going to send it and have it professionally rebuilt. The dial is badly faded, in some spots completely, so I will have to order a new one, but the only repop I can find for the 37-61 is without the lettering I show in the detail picture, nor does it have any other markings like "London" above the shortwave band, just the frequency scales. If anyone knows of a source of a better repop let me know. The pjotofinish is not too badly shot. I may just try some artistic "filing in" using my oil paints, and see what happens before I go whole hog and attempt to reproduce the original. I know that is beyond my skills, whereas I have done oil painting for years, and that seems less daunting to me, and also less destructive to the original finish that remains. Any suggestions about how to "fill in" those little problems before I start would be gratefully heard., so, without further ado, here are some pictures...
[Image: http://41.media.tumblr.com/6a76edc01b52c...1_1280.jpg]
[Image: http://41.media.tumblr.com/f041579b7d965...2_1280.jpg]
[Image: http://41.media.tumblr.com/f303a1183561e...3_1280.jpg]
[Image: http://40.media.tumblr.com/530fd19044b1c...4_1280.jpg]
[Image: http://41.media.tumblr.com/a3b08b005787c...5_1280.jpg]
[Image: http://41.media.tumblr.com/628d824ff82f2...6_1280.jpg]
So, that will be a project for me over the winter. Should keep me amused.
Posts: 178
Threads: 19
Joined: Feb 2014
City: The Motor City,Detroit MI
I love it when there's no rust on the chassis.
Posts: 1,824
Threads: 114
Joined: Jul 2014
City: Sneedville, TN
(09-25-2015, 03:17 PM)Kestas Wrote: I love it when there's no rust on the chassis.
Nope, just a lot of dust as far ad I can see.
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
Nice, I think I saw that but shipping is usually a deal breaker...
Me
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 1,824
Threads: 114
Joined: Jul 2014
City: Sneedville, TN
Even the shipping would not have been bad, a tad less than $18, but why risk it when it was 45 minutes up route 95 ? I found a place that makes brand new photofinish decals for this model, so I am going to completely redo the front with one of those. http://www.vintageradiolabels.com/refaux-pro.html Now, to figure out about that dial......
Posts: 1,470
Threads: 97
Joined: Jul 2012
City: Poughkeepsie, N.Y.
Mike nice Hope it turns out to be a keeper!
Posts: 4,441
Threads: 419
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
I think your model is available, these look pretty good. Not inexpensive though.
http://www.oldradioparts.net/dials1.html
Paul
Tubetalk1
Posts: 1,824
Threads: 114
Joined: Jul 2014
City: Sneedville, TN
(09-25-2015, 08:26 PM)Paul Philco322 Wrote: I think your model is available, these look pretty good. Not inexpensive though.
http://www.oldradioparts.net/dials1.html
Paul
I have actually already e-mailed him a question about this, and await his reply. We shall see.
Posts: 1,824
Threads: 114
Joined: Jul 2014
City: Sneedville, TN
Paul, I sent him a scan of mine, and he says his is an exact repro, except for the color of the material, which is a bit lighter. I know they darken with age and smoke, so maybe they were a lot lighter brand new than people think. If it is similar, and has the right printing, I will be very happy. Tonight I ordered the dial, so we shall see.
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
Testing a speaker and output transformer Trutone A2-G
|
| Hi Murf,
Do this:
Monitor between ground and one plate of the rectifier while playing the radio. Do the same with ...MrFixr55 — 09:51 PM |
|
Philco Battery-WWII vintage
|
| Mike;
I take it that Soviet cars did not come equipped with block heaters, hence the hot oil change? Where I lived in...Arran — 08:42 PM |
|
Philco 42-345 Restoration/Repair
|
| The more the better. (Within reasonable limits.)
2-5 times more is no problem in this case.Vlad95 — 03:50 PM |
|
Philco 42-345 Restoration/Repair
|
| Thanks, RodB and Vlad95,
I was mainly trying to figure out this capacitor to locate a replacement, Vlad thank you for...osanders0311 — 03:44 PM |
|
Testing a speaker and output transformer Trutone A2-G
|
| Would an output transformer if weak, cause the problems I am seeing with lower B+ voltage?
murfmurf — 01:22 PM |
|
Testing a speaker and output transformer Trutone A2-G
|
| Hello murf! I merged the threads. Please do not start new threads regarding the same radio. Take care, - GaryGarySP — 10:21 PM |
|
Philco 42-345 Restoration/Repair
|
| Regarding picture 5 on page 1 of this thread this capacitor is #40 on scematics diagram - 4mF+4mF. Black wire is "-...Vlad95 — 09:01 PM |
|
Philco 42-345 Restoration/Repair
|
| That's a dual 4 MFD, red and green are both 4mfd and black is common negative. You should be able to see them in the pow...RodB — 08:58 PM |
|
Philco 42-345 Restoration/Repair
|
| Can anyone help me figure out a capacitor that has 3 wires coming out of it red and green on one side and a black wire o...osanders0311 — 08:14 PM |
|
Two small radios from France. Restoration and review.
|
| Greetings;
I think that it's possible that the assortment of components was the result of post war parts shortages, a...Arran — 12:18 PM |
|
Who's Online
|
There are currently 637 online users. [Complete List]
» 4 Member(s) | 633 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
