Posts: 23
Threads: 4
Joined: Mar 2015
City: USA Lincoln, CA
Does anyone know where I can find an insulated alignment tool with a 1/4" hex socket for adjusting tuning capacitors and IF adjustments. I had one years ago but can not find one today. The kits that the on-line Electronic stores sell do not have the hex socket in them I have restored 2 Philco radios, Models 80 & 81. You can not use a metallic tool for adjustments on these radios.
Thanks very much to anyone who can help.
Posts: 5,166
Threads: 273
Joined: Nov 2012
City: Wilsonville
State, Province, Country: OR
Posts: 23
Threads: 4
Joined: Mar 2015
City: USA Lincoln, CA
(09-29-2015, 09:36 PM)klondike98 Wrote: See this post for some options http://philcoradio.com/phorum/showthread...4#pid97344
Thanks! I think I can make one.
Posts: 2,128
Threads: 18
Joined: Oct 2008
City: Merrick, Long Island, NY
Amazing things can be crafted from chopsticks rejected from the kitchen by my better half, so long as they are dried off.
Posts: 201
Threads: 26
Joined: Dec 2005
City: Morris Plains, NJ
As recall those Philco hex adjustments are at ground potential so you can use pretty much any metallic tool for tuning.
Pete AI2V
Posts: 1,411
Threads: 72
Joined: Oct 2007
City: Linn Creek, MO
Quote:As recall those Philco hex adjustments are at ground potential
That is true for the 80 and 81 but, don't assume this is so for all Philcos. Some Philco models have trimmers on the primary of the IFs, those will have B+ on them.
Steve
M R Radios C M Tubes
Posts: 7,300
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
OUCH!!!! Spark Spark!!!!!!!
Terry
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
