Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Cartridge and needle help, M1620-124
#1

I have inherited my grandparents Philco M1620 radio/record player.  I grew up listening to this radio and playing records on it, and I hope to share with my kids the enjoyment of vinyl.  It came to me with no cartridge or needle. There are three wires; red, black & white, with tiny push-on connectors for the cartridge.  Would this have used a ceramic cartridge?  There are two threaded holes inside the tonearm for attaching the cartridge that are spaced 0.43" apart, see photo. 
Any advice on what cartridge and needle to use for would be very much appreciated.

Brad
Waxhaw, N.C.


Attached Files Image(s)
       
#2

http://m.ebay.com/itm/351169705698

I believe it's an EV-107.  I added a link to one on eBay.  

I've dealt with the vendor several times.  He's good to deal with!

It's a cartridge/needle combo.  When the stylus wears out you replace the whole thing.

Check with needle daddy to see if that cartridge comes with a bracket.  If not, check with Gary at the voice of music website.  He'll have the cartridge and whatever you need to mount it in the tone arm.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 38-7 Oscillation
Will do, thank you.tludka — 10:26 AM
Philco 38-7 Oscillation
As to your oscillation issue I would align the IF transformers. That may solve the problem. You also would want to check...Radioroslyn — 10:22 AM
Philco 38-7 Speaker
Thank you, I will check this out, I do have some shields I can place around the specific tubes. I searched the four que...tludka — 10:18 AM
Philco 38-7 Speaker
Also, check if any wires going to Grid Caps of the tubes that are supposed to be INSIDE of their respective shields (if ...morzh — 09:54 AM
Philco 38-7 Oscillation
Usually in this forum, when we discuss a radio, we do not multiply threads. You already have a thread on this. If you wa...morzh — 09:27 AM
identify very thin wire for replacement on 37-640
You can possibly use a heatshrink tubing. If you decide to replace the wire, anything gauge 24, 300V rated will do (it ...morzh — 09:25 AM
identify very thin wire for replacement on 37-640
Happy Thanksgiving,  I have attche a photo of a very thin wire with black plastic-looking insulation(some of it has com...georgetownjohn — 09:14 AM
Philco 60 Squealing
I got my signal tracer out to see if I could tell at what stage the squeal was coming from. It is present on the plate o...dconant — 09:07 AM
Philco 16B Parts
The 16B's in the tombstone cabinet sport a 10 1/2" spkr vs the older cathedral sets which uses an 8". The p/p ...Radioroslyn — 12:58 AM
Philco 38-7 Oscillation
I have let this one sit because of other duties. Now I am back, and I have a couple of questions. I hooked up a Hammond ...tludka — 11:16 PM

[-]
Who's Online
There are currently 4424 online users. [Complete List]
» 2 Member(s) | 4422 Guest(s)
AvatarAvatar

>