I really am hopeless.....
Posts: 2,570
Threads: 336
Joined: Jun 2013
City: lawrenceville nj
that's the bad
would you rather be picking broken tube glass pieces up
most sellers would not even care about insides
shake out over garbage can and vacuum
sam
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 1,824
Threads: 114
Joined: Jul 2014
City: Sneedville, TN
Yeah, sam, but most of the sellers I have bought from wrap the radio in cling wrap first, that keeps the crap out, saves about half the number of peanuts, but the peanuts used can still cushion it just fine from the outside. I've never had one shipped that way arrive messed up. Perhaps I have just been lucky. C'est la vie. If that is my biggest gripe, it's minor.
Posts: 15,444
Threads: 539
Joined: Oct 2011
City: Jackson, NJ
Someone was making pink popcorn inside that radio.
O heck, Mike, as long as the Maalox fart beans did not ruin anything like the speaker cone, why do you care? Use them yourself next time.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Brenda: since you are a fellow military type, why not use our favorite method of disposal and just set them on fire?
Posts: 109
Threads: 18
Joined: Mar 2015
City: Ann Arbor, Michigan
(10-18-2015, 10:45 AM)mikethedruid Wrote: Ah, Squire, I remember the days when folks WOULD gladly donate the "old radio that has been sitting in the attic" just to get rid of it. I got several of my radios that way back in the '60s. Today people know they are antiques and folks will pay good money for them, so such generosity is a lot less frequent. Funny how the "junk" of fifty years ago are now the "antiques" of today.
People will pay good money for SOME of them. The problem is that there are a lot of radios that deserve restoration and people will not pay anything for them.
Mark K8KZ
Posts: 109
Threads: 18
Joined: Mar 2015
City: Ann Arbor, Michigan
(10-22-2015, 11:14 AM)BrendaAnnD Wrote: I keep asking, PLEADING for sellers not to use peanuts. They're a PITA, near impossible to control when unpacking, and, worst of all, IT COSTS ME $8 A BAG TO DISPOSE OF THEM!
+1
Peanuts are just terrible. A convenience for the shipper, but a curse for the person who has to open the package.
Mark K8KZ
Posts: 4,639
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
(10-29-2015, 06:32 AM)TA Forbes Wrote: Brenda: since you are a fellow military type, why not use our favorite method of disposal and just set them on fire?
They also dissolve quite nicely in gasoline, even better in lacquer thinner, you can use it as a form of coil dope or for starting fires whilst still wet.
Regards
Arran
Posts: 2,128
Threads: 18
Joined: Oct 2008
City: Merrick, Long Island, NY
Winter is coming , so if you have a few difficult cased indoors, so much the better. Look on the bright side, or better yet refuse payment.
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
I found a shop vac works well to get the rascals out. Only problem was it sucked one of the tubes right up! Tube was fine and it no doubt improved the vacuum in it.
Jerry
A friend in need is a pest! Bill Slee ca 1970.
Posts: 156
Threads: 12
Joined: Dec 2012
City: Seattle, WA
All y'all crack me up!
Fortunately for me, my wife hates peanuts more than I do. So anything that comes packed in peanuts, she inevitably wants them gone before I do. I never have to deal with them!
I do like the "dissolve in gasoline" option, though. Can you use it in your lawnmower after that?
(This post was last modified: 11-23-2015, 03:02 AM by palegreenthumb.)
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
PT-6 antenna connections
|
Hi Bridcarl
+1 on the others. Pin 6 of the 7C6 is the AVC Diode so it is appropriate that that pin 4 of the coil con...MrFixr55 — 07:30 AM |
462ron
|
Joseph, this is beyond awesome. A lot of thought and engineering went into this and you hit a home run! Now I must save ...462ron — 07:27 AM |
Cannot Adjust an IF Transformer’s cores
|
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM |
Cannot Adjust an IF Transformer’s cores
|
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM |
PT-6 antenna connections
|
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM |
Cannot Adjust an IF Transformer’s cores
|
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM |
PT-6 antenna connections
|
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4.
Yes, pin 6 of the 7C6 is...RodB — 07:34 PM |
bridkarl
|
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM |
Cannot Adjust an IF Transformer’s cores
|
Joseph, now you are an engineer!!RodB — 06:37 PM |
PT-6 antenna connections
|
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM |
Who's Online
|
There are currently 3630 online users. [Complete List] » 3 Member(s) | 3627 Guest(s)
|
|
|
![>](https://philcoradio.com/phorum/images/bootbb/asb/right_arrow.png)
|