Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

I have been lucky!!
#1

In the last couple of days I have come up with 2 great finds. Has anyone In their radio collection come across a Westinghouse 370 console radio that was made in the run of 1939? The one I came across is in very good condtion. The chassics shows a little bit of rust though. If anyone has heard of this set or has one in their collection please let me know. I have not heard any talk on this console on this porum....I would like to know more about this console before I add it to my collection. THANKS!    Icon_confused
#2

Hi John,
Looks like a real beast! RF amp,separate osc/mixer toobs, two IF stages, 10 wt p/p output, 12'' spkr and motor tuning. Hope it doesn't have rubber wire.

> I have not heard any talk on this console on this porum....
It is called The Philco Phorum after all.

Terry
#3

Do you have some pictures of the radio in question?




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
PT-6 antenna connections
Hi Bridcarl +1 on the others.  Pin 6 of the 7C6 is the AVC Diode so it is appropriate that that pin 4 of the coil con...MrFixr55 — 07:30 AM
462ron
Joseph, this is beyond awesome. A lot of thought and engineering went into this and you hit a home run! Now I must save ...462ron — 07:27 AM
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM

[-]
Who's Online
There are currently 3636 online users. [Complete List]
» 3 Member(s) | 3633 Guest(s)
AvatarAvatarAvatar

>