Philco 91 Restore Code ??
|
Your 8 watt transformer is good, the 42s produce 6 watts and you won't be sending maximum volume to the speaker anyway. ...RodB — 05:54 PM |
RCA T62 is playing.....
|
So sometime back I posted some photos of a badly damaged in transport T62, not the tank.
I did manage to get a donor c...Paul Philco322 — 05:43 PM |
Philco 40-120C Restoration
|
I found the problem. I had some faulty wiring on the field coil. Unfortunately, now I'm getting low voltage on the plate...bluecap — 05:21 PM |
Philco 89 indicator light.
|
Is there some trick to getting the indicator lamp evenly spaced between the frequency bands? Seems like no matter what I...Jim Dutridge — 04:37 PM |
Philco 40-120C Restoration
|
Hi David,
Check the cathode bias resistor, it may have changed value. That will affect grid bias, etc. Also, verif...MrFixr55 — 03:26 PM |
Philco 91 Restore Code ??
|
Hi DConnat,
Yes, the 42s are in Pentode Mode, cathode bias. I am using the schematic from the Philco Library, Link ...MrFixr55 — 03:04 PM |
Philco 40-120C Restoration
|
Not my radio just trying to help. DavidDavid — 02:48 PM |
Philco 91 Restore Code ??
|
Thanks Rod. Since the screen grid is not tied to the plate then my tubes are pentode right? I see the candohm ties to th...dconant — 02:29 PM |
Philco 91 Restore Code ??
|
Yes, you can look at the schematic. When the output tube screen grid is connected directly to the plate then it's wired ...RodB — 01:51 PM |
Philco 91 Restore Code ??
|
Can someone tell me if my 42 tubes are connected triode or pentode in fixed or cathode bias? How could I tell by looking...dconant — 10:47 AM |