Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

do you know this radio?
#2

I'd put the chassis at about 1932. It's a pretty dinky set, and I'm sure, not the original chassis that was in that cabinet. The cabinet could well have been from about 1928.

I'll guess that the tube complement of the chassis is 24A oscillator-mixer, 24A I.F., and 24A detector. The power amp is pretty surely a 47, and the rectifier an 80. Could have been the product of many makers, I suppose, but its origin isn't very obvious. The socket for the I.F. is a 5 pin.

The cabinet doesn't ring a bell with me, but may be familiar to someone else. It just looks too expensive to have had a little clunker as this originally in it.


Messages In This Thread
do you know this radio? - by diyahnih - 04-19-2009, 08:49 PM
Re: do you know this radio? - by Doug Houston - 04-19-2009, 09:37 PM
Re: do you know this radio? - by diyahnih - 04-20-2009, 06:35 PM
Re: do you know this radio? - by Doug Houston - 04-21-2009, 09:21 PM
Re: do you know this radio? - by Arran - 04-24-2009, 08:42 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM

[-]
Who's Online
There are currently no members online.

>