01-16-2016, 07:20 PM
Regarding my bulb question:
(1) I had the part numbers from the service documentation.
(2) I visited “parts values” on the Philco Repair Bench.
(3) The answer is:
[Image: https://lh3.googleusercontent.com/-399d7...520790.jpg]
Since the “special flat filament” bulb is not available, I made a reproduction:
[Image: https://lh3.googleusercontent.com/-6TfVk...520791.JPG]
The only high-temperature paint I had was “wrinkle coat,” which doesn’t cover well with a thin coat. Flat black automotive or barbeque grill high-temperature paint will work better.
(1) I had the part numbers from the service documentation.
(2) I visited “parts values” on the Philco Repair Bench.
(3) The answer is:
[Image: https://lh3.googleusercontent.com/-399d7...520790.jpg]
Since the “special flat filament” bulb is not available, I made a reproduction:
[Image: https://lh3.googleusercontent.com/-6TfVk...520791.JPG]
The only high-temperature paint I had was “wrinkle coat,” which doesn’t cover well with a thin coat. Flat black automotive or barbeque grill high-temperature paint will work better.
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
