Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 40-150 Code 121 Multiple Reception
#3

Hi Oscar,
Sounds like image rejection problems to me. Are you using the original antenna/loading gizmo shown in the schematic as p/n #1? Without that the circuit may not resonate and cause the problem you describe.

If you do have it and suffer from images a good alignment may cure it.

Good luck,
Bill


Messages In This Thread
Re: Philco 40-150 Code 121 Multiple Reception - by don'tdomelikethat - 05-01-2009, 04:36 PM
Re: Philco 40-150 Code 121 Multiple Reception - by exray - 05-01-2009, 06:49 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 89B code 123 newbie
Hi all and thanks for the great responses!  I went with a can left over from another radio, kinda scratched up but it do...Kurt P — 04:35 PM
Clear Schematic for 41-255
AH Just noticed 1 error on my cleaned-up schematic... Part # 27 - the 8uf electrolytic cap...The lead that is marked RE...patrician56 — 04:10 PM
Clear Schematic for 41-255
Hi Ross, I don't know if you still need a clear schematic for the 41-255 but here is one that I cleaned up. I added pin...patrician56 — 03:45 PM
AC/DC Transformer-less Sets
Joseph,   Thanks for the follow up. MrFixr55,   Thanks for the info. I was aware of the "Current Wars"...PeterN — 03:32 PM
AC/DC Transformer-less Sets
Fantastic report, Mr. Fixr! I had never read about AC/DC sets originally running at a higher price than AC-only models, ...jrblasde — 01:21 PM
49-504
Also wheni first power on the 7a8 gets very bright more than normal not sure what I did wrongphilco4me — 12:53 PM
49-504
Hello all I am doing a 49-504 and in section 4 I see C401is that a 5mmf ? I did not see that when I replaced the caps. ...philco4me — 12:47 PM
Looking for place to donate unique Philco Philco J-1930 Prototype
Thx for the description. I thought that it had to have a single 10 - 12" Sensor. Congrats on restoring the GE and...MrFixr55 — 10:12 AM
AC/DC Transformer-less Sets
Some of the original Edison DC generators were in use until the 1940s. The NYC subway and electrified Long Island Rail ...MrFixr55 — 09:39 AM
Samlex heavy-Duty bench supply filter question
I suggest sticking with the original values. Depending upon the design if you increase the cap values too much the incre...DaleHCook — 08:55 AM

[-]
Who's Online
There are currently 1895 online users. [Complete List]
» 2 Member(s) | 1893 Guest(s)
AvatarAvatar

>