Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

One of my "dream" radios finally found
#1

A 1936 General Electric model E-101

"Colorama"

Top of the line table model offered by GE in 1936, with 10 tubes and 3 bands! It's housed in a HUGE cabinet measuring 16" wide, 21" tall and 12" deep. GE Pioneered metal tubes, and they were still relatively new in '36. The radio features all its original tubes, save for two (the glass 6L6 will be replaced with a metal one). This is a rare one year only model that used a saturable reactor and seven #40 colored dial lights (4 red and 3 green) that changes the color of the dial. When a station is strong and optimally tuned in, the dial turns green. In between stations, it turns red. I was very fortunate that none of the coils were open on this radio...something very common. Especially in the saturable reactor.

   

   

   

   

   

Greg V.
West Bend, WI
Member WARCI.org


Messages In This Thread
One of my "dream" radios finally found - by NostalgiaRadioTime - 02-28-2016, 12:27 AM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM

[-]
Who's Online
There are currently no members online.

>