Model 650 Recap Success then ecap blows

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

Model 650 Recap Success then ecap blows

Sourbone
Member

Posts: 63
Threads: 29
Joined: Feb 2010
City: Richland, Michigan

#13

03-26-2016, 11:19 AM

Thanks for your help. The 650 works great. I don't know what I did to screw it up, but I got it back together with your help. I found I had a broken lead on the other 77 cap. I don't know that that would cause the problem, but just reconfigured it all. I measured the voltage on the 78 cap at 110 v on the variac it measures 340v. Thanks for your patience.

Dave

Find

« Next Oldest | Next Newest »

Messages In This Thread

Model 650 Recap Success then ecap blows - by Sourbone - 03-25-2016, 03:58 PM

RE: Model 650 Recap Success then ecap blows - by Mondial - 03-25-2016, 04:22 PM

RE: Model 650 Recap Success then ecap blows - by Sourbone - 03-25-2016, 04:43 PM

RE: Model 650 Recap Success then ecap blows - by Mondial - 03-25-2016, 04:57 PM

RE: Model 650 Recap Success then ecap blows - by morzh - 03-25-2016, 05:46 PM

RE: Model 650 Recap Success then ecap blows - by Sourbone - 03-25-2016, 06:13 PM

RE: Model 650 Recap Success then ecap blows - by morzh - 03-25-2016, 06:21 PM

RE: Model 650 Recap Success then ecap blows - by Sourbone - 03-25-2016, 06:39 PM

RE: Model 650 Recap Success then ecap blows - by Mondial - 03-25-2016, 06:49 PM

RE: Model 650 Recap Success then ecap blows - by morzh - 03-25-2016, 06:56 PM

RE: Model 650 Recap Success then ecap blows - by Sourbone - 03-25-2016, 10:19 PM

RE: Model 650 Recap Success then ecap blows - by morzh - 03-25-2016, 10:24 PM

RE: Model 650 Recap Success then ecap blows - by Sourbone - 03-26-2016, 11:19 AM

RE: Model 650 Recap Success then ecap blows - by morzh - 03-26-2016, 12:38 PM

RE: Model 650 Recap Success then ecap blows - by Radioroslyn - 03-26-2016, 12:59 PM

RE: Model 650 Recap Success then ecap blows - by morzh - 03-26-2016, 02:44 PM

View a Printable Version

Users browsing this thread: 5 Guest(s)

Recent Posts
Philco 60 Squealing
I have been playing the radio for a while now and doing well. Turned it on today and all I got was a whole lot of noise....dconant — 09:39 AM
Rusty Tuning Condenser
Thanks guys. I think I'll give the Naval Jelly a try since I can better control where it goes.dconant — 09:23 AM
Philco Model 80 Transformer resistance
Just forget this number, it is useless anyway. Simply proceed with your project.morzh — 10:08 PM
Philco Model 80 Transformer resistance
My $0.02 is that it is a misprint. I tried to look up the value for the similar 84 and 37-84, and ther is no resistance...MrFixr55 — 09:51 PM
Philco Model 80 Transformer resistance
Thanks for the quick reply! Hmm...well that's good, so what am I seeing that's 1042 ohms on the schematic for the pow...Mike L — 08:46 PM
Philco Model 80 Transformer resistance
The DC resistance of the primary is 8 to 9 Ohm.morzh — 07:54 PM
Philco Model 80 Transformer resistance
I have a feeling the primary winding on the power transformer is bad. My resistance reading on the primary side is 9 ohm...Mike L — 07:48 PM
Rusty Tuning Condenser
I would try Naval Jelly and use a soaked pipe cleaner to get it where it needs to go.RossH — 06:56 PM
38-10T chassis Restoration begins
Hello Dconant , they sold mica to use as a insulator between transistors and their heatsinks too. Rob I will remove th...radiorich — 02:52 PM
38-10T chassis Restoration begins
Thanks for the info guys. I always wondered why the use of mica. Now I know.dconant — 01:52 PM

Who's Online

There are currently 3584 online users. [Complete List]
» 3 Member(s) | 3581 Guest(s)

Login
Username:
Password:	Lost Password?
	Remember me