04-06-2016, 09:20 AM
Mike,
Yes, I plan on replacing the filter caps, the HV caps and resistors first. Then the other e-caps and film caps. Some of the resistors will be replaced because it will convienent when I redo the caps. The Micas, there are only 3 of them will be replaced when the set is working very well.
While waiting for my parts to arrive, I cleaned up the underside of the chassis where some of that Philco black wax had leaked onto some wires and into some of the adjustment pots. It was all cleaned up along with all the back side pots. I also replaced some paper caps and some resistors that I had on hand.
[Image: http://i1060.photobucket.com/albums/t458...ohehy4.jpg]
[Image: http://i1060.photobucket.com/albums/t458...gqlysv.jpg]
Yes, I plan on replacing the filter caps, the HV caps and resistors first. Then the other e-caps and film caps. Some of the resistors will be replaced because it will convienent when I redo the caps. The Micas, there are only 3 of them will be replaced when the set is working very well.
While waiting for my parts to arrive, I cleaned up the underside of the chassis where some of that Philco black wax had leaked onto some wires and into some of the adjustment pots. It was all cleaned up along with all the back side pots. I also replaced some paper caps and some resistors that I had on hand.
[Image: http://i1060.photobucket.com/albums/t458...ohehy4.jpg]
[Image: http://i1060.photobucket.com/albums/t458...gqlysv.jpg]
Crist
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
