Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco style power plugs - who sells them?
#7

(06-02-2016, 03:57 PM)morzh Wrote:  ...BTW then there is a question to you: is there information on which Philco used which plug? I understand this Acorn type was not used by all of them?
Radios like 118, 38-12(15), 39-6(7) etc?

During production of the 1937 models, Philco switched from cloth-covered AC cord to rubber. The rubber cords would have had a molded plug, I believe (the exceptions being 37-690 and 38-690 sets which have special plugs with fuses inside). The same is true of 38-12, 38-15, 39-6, 39-7 and later Philcos.

I've never seen any info on particular plugs used by Philco 1928-1937. On those Philcos I have seen the type such as in the picture you posted from Photobucket, the "acorn" style, as well as some with the "mid century embossed" type plugs in brown Bakelite (which are not really Mid Century). The majority I have seen have been like that in the Photobucket picture, though.

--
Ron Ramirez
Ferdinand IN


Messages In This Thread
RE: Philco style power plugs - who sells them? - by Ron Ramirez - 06-02-2016, 07:39 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM

[-]
Who's Online
There are currently 3635 online users. [Complete List]
» 1 Member(s) | 3634 Guest(s)
Avatar

>