Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Model 41-629 with images
#7

Steve,
You poacher!!!!
All the station that the PB are set on are in the Philly area.
The 1st time I read your title I thought that you where getting station where they don't belong. Any way set looks to be in good shape and with rub on magic (like Sam mentioned) or Gojo/johnson paste wax would make a big improvement. As for FM perhas the simplest would be to add a switch to the phono input to switch between it and a FM tuner or any audio source. I suppose the issue is it you want to go old sckool w/ a FM tuner from the '40s they tend to be not all that great. Drift can be a problem (no afc)

GL

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry


Messages In This Thread
Model 41-629 with images - by SteveinAlaska - 07-20-2016, 12:54 AM
RE: Model 41-629 with images - by Eliot Ness - 07-20-2016, 08:23 AM
RE: Model 41-629 with images - by KCMike - 07-20-2016, 08:51 AM
RE: Model 41-629 with images - by sam - 07-20-2016, 11:02 AM
RE: Model 41-629 with images - by SteveinAlaska - 07-20-2016, 11:46 AM
RE: Model 41-629 with images - by sam - 07-20-2016, 12:35 PM
RE: Model 41-629 with images - by Radioroslyn - 07-20-2016, 12:55 PM
RE: Model 41-629 with images - by Ron Ramirez - 07-20-2016, 01:37 PM
RE: Model 41-629 with images - by w4rtc - 07-20-2016, 04:35 PM
RE: Model 41-629 with images - by Radioroslyn - 07-20-2016, 04:41 PM
RE: Model 41-629 with images - by Ron Ramirez - 07-20-2016, 07:14 PM
RE: Model 41-629 with images - by SteveinAlaska - 07-21-2016, 01:36 AM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM

[-]
Who's Online
There are currently 4124 online users. [Complete List]
» 1 Member(s) | 4123 Guest(s)
Avatar

>