08-05-2016, 07:17 AM
So the fun begins!
You'll need to gather up a 24v 4A transformer like this: http://www.ebay.com/itm/Signal-Transform...SwnNBXXPux
A bridge retificer like this:https://www.westfloridacomponents.com/J691APL02/10A+100V+Bridge+Rectifier+Diode+Micosemi+MB101.html
And a large filter cap like this: http://www.ebay.com/itm/like/23172532281...noapp=true
Theory tells me the the output voltage is going to be 33.6v but practical experience says it's going to sag a bit, in the real world about 30v but that will get us in the ballpark.
If you need direction in the wiring department I'm happy to help out.
You'll need to gather up a 24v 4A transformer like this: http://www.ebay.com/itm/Signal-Transform...SwnNBXXPux
A bridge retificer like this:https://www.westfloridacomponents.com/J691APL02/10A+100V+Bridge+Rectifier+Diode+Micosemi+MB101.html
And a large filter cap like this: http://www.ebay.com/itm/like/23172532281...noapp=true
Theory tells me the the output voltage is going to be 33.6v but practical experience says it's going to sag a bit, in the real world about 30v but that will get us in the ballpark.
If you need direction in the wiring department I'm happy to help out.
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
