Ron's 2016 Cabinet Work Part I: Bozak E-300
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Thanks, guys - and Mike, in my experience I have found that Mohawk toners can usually hide flaws quite well...unlike stain, toning lacquer gives a very even color to the item being sprayed. Which is why, with vintage radios, toners are preferred over stain. (Also the fact that the manufacturers used toners when the radio cabinets were made.)
So...since there is no shortage of Rustoleum products in my area, I'll go somewhere today and pick up a few cans of lacquer...if all goes well, these parts should be looking as they should later today...
--
Ron Ramirez
Ferdinand IN
Messages In This Thread
RE: 2016 Cabinet Work: Bozak E-300 - by Ron Ramirez - 08-07-2016, 08:49 AM
Users browsing this thread: 2 Guest(s)
|
Recent Posts
|
Looking for any info: 1977 Ford-Philco Console Hi-Fi Turntable and Radio
|
Hello PittsburghToast ,
Welcome aboard and it looks like gary may have something for you !
now if I dig through my se...radiorich — 11:35 PM |
Model 80 Antenna Issue?
|
You are kind of on the right path. You can touch the grid cap of the Detector/Oscillator 36 tube. I'm expecting a respon...RodB — 08:48 PM |
Looking for any info: 1977 Ford-Philco Console Hi-Fi Turntable and Radio
|
Welcome to the Phorum, PittsburghToast! I found an old thread that my interest you regarding the quality and worth of P...GarySP — 08:48 PM |
Looking for any info: 1977 Ford-Philco Console Hi-Fi Turntable and Radio
|
Welcome to the Phorum!
:wave:
We do not have anything on that unit in our digital library. There is a Sam's Photof...klondike98 — 08:47 PM |
Model 80 Antenna Issue?
|
I’ve replaced all the caps and resistors and the radio is working but minimal volume unless I put my hand near the re...Hamilton — 08:24 PM |
Looking for any info: 1977 Ford-Philco Console Hi-Fi Turntable and Radio
|
Hi there! this is my first time posting. I recently picked up this Ford-Philco Console record player and radio at a yard...PittsburghToast — 07:28 PM |
philco predicta
|
I found that where I have the 140v B+ there is 50v and the tuner receives 235v through the orange cablecgl18 — 04:14 PM |
Philco 91 code 221
|
Chassis grounds thru rivets is another good place to look. Oh and the stator screws on the tuning cap where the leads at...Radioroslyn — 08:11 AM |
Philco 91 code 221
|
Dirty tube pins and socket, cold solder joint, stray tiny strand of wire, clean the entire area around the oscillator tu...RodB — 08:43 PM |
Philco 91 code 221
|
I have been restoring one of these sets and switched it on yesterday. It didn't exactly spring into life, but after a co...Philconut — 08:26 PM |
Who's Online
|
There are currently 1290 online users. [Complete List] » 1 Member(s) | 1289 Guest(s)
|
|
|

|