[Solamar]

The ones you have now are way off in value. For simplicity a pair of 22mfd@ 450v will work fine. Within reason the capacitance isn't real critical, 200mfd isn't reasonable. I would suspect that the dc voltage at the filament of the 80 tube is going to be about 300vdc or better so you'll need a cap with at least 300v rating or higher. Standard value is 450V. By using the 200mfd@200v your asking for trouble!
Just so you know there where like 5 different versions of the model 60 though it's long run.

http://www.nostalgiaair.org/pagesbymodel...013793.pdf

Thanks for that!  I knew the values should'nt be critical, but 8 mf to 200mf did not seem reasonable!