Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Doubts with 80jr model
#11

(09-04-2016, 09:23 AM)Moti Wrote:  Hello Bob. thank you very much for your reply and especially forgive my bad English. He speaks from Spain. I am very happy to know that no missing sheet !! hehe. more sheets could have improved reception? You radio has boats round or square tune? I think our manufacturing radios may be a little earlier, could be ?? Thank you
Welcome Moti,

> more sheets could have improved reception?

Not so much what it would do is lower the frequency that you are receiving. If you removed sheets (plates) it would raise the frequency some what.

The shape of the coil shields is not all that important what is is whether or not the coils inside are good?? It's common for them to be bad (open windings). Repair is not very difficult if you have some small gauge magnet wire.

Bob mentioned these links on another thread for the model 80.

If you haven't seen them, there are several modifications suggested by Ron and posted on Chuck's website that can help the performance of the 80.


http://www.philcorepairbench.com/tips/svctip43.htm

http://www.philcorepairbench.com/tips/svctip44.htm

http://www.philcorepairbench.com/tips/svctip03.htm


GL
Terry

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry


Messages In This Thread
Doubts with 80jr model - by Moti - 09-04-2016, 07:36 AM
RE: Doubts with 80jr model - by KCMike - 09-04-2016, 08:42 AM
RE: Doubts with 80jr model - by klondike98 - 09-04-2016, 08:51 AM
RE: Doubts with 80jr model - by Moti - 09-04-2016, 09:23 AM
RE: Doubts with 80jr model - by Radioroslyn - 09-04-2016, 12:58 PM
RE: Doubts with 80jr model - by morzh - 09-04-2016, 10:03 AM
RE: Doubts with 80jr model - by Paul Philco322 - 09-04-2016, 10:14 AM
RE: Doubts with 80jr model - by klondike98 - 09-04-2016, 10:36 AM
RE: Doubts with 80jr model - by Moti - 09-04-2016, 12:14 PM
RE: Doubts with 80jr model - by Paul Philco322 - 09-04-2016, 11:08 AM
RE: Doubts with 80jr model - by morzh - 09-04-2016, 11:38 AM
RE: Doubts with 80jr model - by klondike98 - 09-04-2016, 01:33 PM
RE: Doubts with 80jr model - by Paul Philco322 - 09-04-2016, 08:43 PM
RE: Doubts with 80jr model - by Moti - 09-05-2016, 04:44 PM
RE: Doubts with 80jr model - by klondike98 - 09-05-2016, 05:13 PM
RE: Doubts with 80jr model - by Moti - 09-06-2016, 05:38 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Rogers Majestic R-646
Today I finished inspecting all the parts. The result is not very pleasing. The first positive news: 1) The power tr...Vlad95 — 11:40 PM
HiFi (Chifi) tube amp build - but my own design.
Well, found muh culprit. After using socket test adapters and finding voltages all ok, swapping 6V6s, no avail, swapped ...TV MAN — 11:18 PM
HiFi (Chifi) tube amp build - but my own design.
Well, maybe - maybe not  :lol: It's been an interesting project so far! Something so simple, yet so cranky. The 1st one ...TV MAN — 05:12 PM
1949 Motorola 5A9M
Haven't thought of Burgess batteres in a while  https://www.radionostalgia.ca/lib/Images/battery/us/burgess1D.jpgi ...Vlad95 — 03:50 PM
Philco Model 16 wiring question
Measure the voltages first, just in case.morzh — 02:19 PM
1949 Motorola 5A9M
Haven't thought of Burgess batteries in a while Mr. Fixer. Boston Edison always used Burgess in their Bright Star yellow...Paul Philco322 — 02:17 PM
1949 Motorola 5A9M
Thanks Sam. I'll let you know. I can probably scare some up from the local radio club.klondike98 — 02:07 PM
Philco 89 Code 123 Osc Coil
Hello,  I thought I would post my findings on my bad oscillator tickler coil. There were 27 turns on the outer coil b...dconant — 12:38 PM
Philco Model 16 wiring question
Thanks Morzh. So it appears I did wire it incorrectly and I have to switch the wires between pins 2 and 4.bobclausen — 09:24 AM
Philco 46-1209 strange behavior
No, it's not a problem, just during certain condition it could show up. Yes, an internal tube short could do that too. ...morzh — 09:13 AM

[-]
Who's Online
There are currently 1120 online users. [Complete List]
» 1 Member(s) | 1119 Guest(s)
Avatar

>