Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Radiola 60 ??
#4

The Radiola 60 is a very interesting set, as it is a superhet using all type 27 triode tubes in the RF and IF stages. Really the first superheterodyne designed from the ground up as an AC powered radio.As Arran mentioned, it performs amazingly well for a 1920's radio.

I would not be surprised if you gradually powered up this radio and it worked as is. I have a 60 which sat in a damp barn for 80 years and worked after replacing one open resistor. Mine is presently running fine on all its original parts other than that one resistor. The original paper filter caps seem to be of a better quality than those of later sets.

 It will probably need a good alignment as the triode IF amps need neutralization adjustments to eliminate squeals and howls due to oscillation.


Messages In This Thread
Radiola 60 ?? - by vecher - 01-05-2017, 12:01 AM
RE: Radiola 60 ?? - by Arran - 01-05-2017, 03:54 AM
RE: Radiola 60 ?? - by Fred Taylor - 01-05-2017, 07:54 AM
RE: Radiola 60 ?? - by Mondial - 01-05-2017, 08:07 AM
RE: Radiola 60 ?? - by Jayce - 01-05-2017, 11:48 AM
RE: Radiola 60 ?? - by klondike98 - 01-05-2017, 12:32 PM
RE: Radiola 60 ?? - by vecher - 01-05-2017, 12:58 PM
RE: Radiola 60 ?? - by vecher - 01-05-2017, 02:50 PM
RE: Radiola 60 ?? - by Arran - 01-09-2017, 04:11 AM
RE: Radiola 60 ?? - by Jayce - 01-05-2017, 11:13 PM
RE: Radiola 60 ?? - by Fred Taylor - 01-06-2017, 07:44 AM
RE: Radiola 60 ?? - by Jayce - 01-09-2017, 06:46 PM
RE: Radiola 60 ?? - by Arran - 01-10-2017, 03:49 AM
RE: Radiola 60 ?? - by Jayce - 01-15-2017, 12:18 PM
RE: Radiola 60 ?? - by Phlogiston - 01-15-2017, 02:13 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM

[-]
Who's Online
There are currently no members online.

>