02-20-2017, 08:26 PM
Hi and welcome,
For me it would depend on the condition of the chassis and shield. If it's a bit rusty I would keep the old label. To preserve it you could spray it with some satin clear lacquer masking off the area around the label. Use a few light coats if you use heavy coats it could make any rust more noticeable though the paper.
For me it would depend on the condition of the chassis and shield. If it's a bit rusty I would keep the old label. To preserve it you could spray it with some satin clear lacquer masking off the area around the label. Use a few light coats if you use heavy coats it could make any rust more noticeable though the paper.
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
