It is time: The Fisher TA-600
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
The front panel is made of brass. The panel on my set is in excellent shape with only a few minor scratches.
I want to keep it that way, so I pulled the knobs...
[Image: http://www.philcoradio.com/images/phorum...00_004.jpg]
...then removed four nuts on the FM tuning, AM tuning, bass and volume shafts. Once the four nuts were removed, the front panel pulled right off and was put away for safe keeping.
I wanted to remove the dial glass also, but the brackets holding the dial glass do not appear to be easily removable - each bracket is held in place by tabs which are folded over in back of the face plate.
So...I will just have to be extra careful
--
Ron Ramirez
Ferdinand IN
Messages In This Thread
RE: It is time: The Fisher TA-600 - by Ron Ramirez - 04-02-2017, 05:10 PM
Users browsing this thread: 2 Guest(s)
|
Recent Posts
|
Model 80 Antenna Issue?
|
You are kind of on the right path. You can touch the grid cap of the Detector/Oscillator 36 tube. I'm expecting a respon...RodB — 08:48 PM |
Looking for any info: 1977 Ford-Philco Console Hi-Fi Turntable and Radio
|
Welcome to the Phorum, PittsburghToast! I found an old thread that my interest you regarding the quality and worth of P...GarySP — 08:48 PM |
Looking for any info: 1977 Ford-Philco Console Hi-Fi Turntable and Radio
|
Welcome to the Phorum!
:wave:
We do not have anything on that unit in our digital library. There is a Sam's Photof...klondike98 — 08:47 PM |
Model 80 Antenna Issue?
|
I’ve replaced all the caps and resistors and the radio is working but minimal volume unless I put my hand near the re...Hamilton — 08:24 PM |
Looking for any info: 1977 Ford-Philco Console Hi-Fi Turntable and Radio
|
Hi there! this is my first time posting. I recently picked up this Ford-Philco Console record player and radio at a yard...PittsburghToast — 07:28 PM |
philco predicta
|
I found that where I have the 140v B+ there is 50v and the tuner receives 235v through the orange cablecgl18 — 04:14 PM |
Philco 91 code 221
|
Chassis grounds thru rivets is another good place to look. Oh and the stator screws on the tuning cap where the leads at...Radioroslyn — 08:11 AM |
Philco 91 code 221
|
Dirty tube pins and socket, cold solder joint, stray tiny strand of wire, clean the entire area around the oscillator tu...RodB — 08:43 PM |
Philco 91 code 221
|
I have been restoring one of these sets and switched it on yesterday. It didn't exactly spring into life, but after a co...Philconut — 08:26 PM |
Philco 50-925 antenna connections
|
That's super. Glad to hear you figured it out. Paul.Paul Philco322 — 11:11 AM |
Who's Online
|
There are currently 1237 online users. [Complete List] » 1 Member(s) | 1236 Guest(s)
|
|
|

|